A Sweet Solution to the Thermal Energy Storage Problem
September 26, 2016 | CORDISEstimated reading time: 3 minutes
As scientists and researchers continue to seek new ways to reduce dependency on fossil fuels and decrease the amount of CO2 put into the air, one area that is sometimes overlooked is how heat is stored. For example, although much research has gone into collecting and using solar and wind energy, little has gone towards answering the question of how to store excess energy for the times when the sun is down or the wind isn’t blowing.
Traditionally, the answer to this storage question has been batteries or, in some cases, pumped hydroelectric storage – two solutions that are far from perfect. In fact, some of their inefficiencies can actually cancel out any environmental benefit created by using solar and wind energy in the first place.
One possible solution to the storage question is to convert the energy into thermal energy and store it in thermal energy storage facilities, which have been shown to be generally more efficient, better at capturing wasted heat and able to provide more low-cost energy. However, before we can make widespread use of thermal energy, research into the development of cost-effective, high-density storage technology is needed.
And this is exactly what the researchers from the EU-funded SAM.SSA project delivered.
Thinking outside the box
The project’s objective was to develop new phase change materials (PCM) for seasonal thermal energy storage applications (STES) in the range of medium temperatures. Researchers wanted these materials to be low-cost, environmentally sound, safe and easy to use. Furthermore, the materials would have to be able to serve as a long-term storage solution that provided significantly lower levels of thermal loss than currently available options.
This was an innovative approach to the problem as PCM are not typically viewed as a STES option. This is due to their insufficient energy densities and their high risk of solidification during storage – a phenomena caused by inadequate insulation for maintaining temperatures beyond the melting point.
The magical material
For SAM.SSA, the magic material for overcoming the PCM problem was sugar alcohol, a common and abundantly available waste product of the food industry. Also known as molecular alloys based on sugar alcohols (MASA), this material allows for the adjustment of the melting point and, as a result, significantly increases energy density. According to a recent article on the project published in ‘The Journal of Physical Chemistry’, sugar alcohols, when mixed with carbon nanotubes, create a material capable of storing renewable energy as heat.
The project focused on sugar alcohols as they permit high levels of undercooling, which minimises the risk of spontaneous PCM solidification. They also reduce the requirements for insulation, as well as thermal loss during long-term storage. With the application of a local thermal shock or ultrasound, nucleation and subsequent crystallisation is induced, allowing for an easy and efficient discharge of the energy from the storage system.
Laying the foundation
When carbon nanotubes of varying sizes are mixed with two types of sugar alcohols – erythritol and xylitol – researchers found that, with one exception, heat transfer within a mixture would decrease as the nanotube diameter decreased. They also found that, as a general rule, higher density combinations meant better heat transfer. These findings are significant as they lay the foundation for the future design of sugar alcohol-based energy storage systems.
At the time of the project’s conclusion, researchers had created an early-stage prototype for treating pure sugar alcohol or sugar alcohol blends to achieve crystallisation. With basic concepts for further prototypes already in the works, along with exploitation strategies, SAM.SSA researchers are optimistic about the use of MASA as an answer to the problems of thermal energy storage.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Adura Solutions Exhibits at Del Mar 2024
04/18/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year's Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.