Mobile Phone Panel Penetration Rate Estimated to Exceed 50% in 2023
September 26, 2022 | TrendForceEstimated reading time: 3 minutes
According to the latest TrendForce research report, the proportion of OLED in the mobile phone market is expected to exceed 50% in 2023, up from 42% in 2021. As the penetration of OLED in the mobile phone market gradually expands, IT products will be the next battlefield for key OLED developments. In order to further expand the IT market, panel manufacturers have increased capital expenditures for the construction of IT panel production lines and shifted planning to higher generational fabs to achieve more effective and economical sectioning but also taking on increasingly technical challenges.
Compared with the performance of traditional LCDs in laptops, OLED present obvious disadvantages in terms of lifespan and pricing and its IR drop (voltage drop) has a more obvious effect on power consumption as size increases. In order to resolve voltage drop and pixel non-uniformity caused by current passing through a large area, in addition to the transparency and thickness (resistance) of the cathode, the design of additional auxiliary electrodes is even more important in reducing power consumption. In terms of performance, COE (Color filter On Encapsulation) and MLP (Micro Lens Panel) technology can also be used to increase light extraction efficiency and reduce overall power consumption. Coupled with the introduction of Tandem technology, connecting OLEDs in series can effectively extend material lifespan since current is halved at the same brightness, thus meeting the specifications of notebook PCs.
In terms of materials, in order to solve the problems related to poor traditional fluorescent luminous efficiency and blue phosphorescence lifespan, in addition to LGD's mass production of deuterium blue series fluorescent materials, the strategic deployment of third-generation OLED material TADF (Thermally Activated Delayed Fluorescence) and fourth-generation super-fluorescence mass production has also gradually accelerated. The 100% energy conversion that could only be achieved previously by doping noble metals in phosphorescence can be achieved by TADF, while super-fluorescence is achieved by doping TADF fluorescent materials to improve the issues of TADF’s large half-wave width, poor color purity, and lifespan. In addition to actively improving the luminous efficiency of blue light, SDC also recently acquired German company Cynora and 300 to 400 OLED patents. Previously, Cynora released green and blue TADF materials, claiming blue materials increase luminous efficiency by 15%. In addition to restraining the price of UDC’s blue phosphorescent materials, this acquisition also poses a threat to panel factories that choose to use TADF materials in the future. If there is a dispute with Kyulux, another Japanese company that has made progress in TADF, SDC can form a protective barrier of patents.
TrendForce further indicates, in the construction of large-generational OLED panel fabs, glass substrates laminated with thin-film encapsulated hybrid OLEDs will be prioritized to reduce weight and to cope with the problem of wrinkling at the edges of PI substrates as surface area increases. In addition, evaporation machinery size limitations have always been problematic. Arranging the various generations of evaporation machinery has become key to the development of the current wave of technological evolution. In order to overcome sagging FMM mask center of gravity caused by the lengthening and resolution of larger generations and to ensure evaporation yield after surface totals increase, SDC partnered with ULVAC to develop vertical evaporation equipment. However, the transportation of vertical substrates, the distribution of tension after vertical meshing, and the uniformity of material flow during vertical evaporation will all lead to more challenges in the new process. In addition, since SDC signed an agreement with ULVAC, other panel manufacturers are looking to TOKKI to continue discussions regarding generational re-optimization of horizontal machines and wish to overcome core problems in a more stable fashion such as with G8.6 or multiple G6 machinery. As for the large-generational printed OLED jointly developed by CSOT and JOLED, relevant materials and equipment have yet to be perfected, which will affect the subsequent planning of CSOT in regards to OLED notebooks and the development of its T8 production line.
In summary, TrendForce believes the next few years will be a critical period for the enhancement of OLED penetration. In the past, Apple has repeatedly played a key role in many new technologies and the launch of new products. The aforementioned development and discussion of numerous medium-sized OLED technologies are also highly related to Apple's plan to adopt OLED panels in future mid-size products. Since the near-term remains constrained by the slow evolution of the efficiency of large generational equipment and materials, coupled with the overall impact of a poor economic environment as a whole, the development of OLED panels in medium-sized IT products will continue to move slowly in the next two years. However, if Apple can launch iPad and MacBook series with OLED panels in accordance with its planning after 2024, it is expected to bring extremely positive benefits to the development of OLED panels in terms of IT products.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.