Intel Research Fuels Moore’s Law and Paves the Way to a Trillion Transistors by 2030
December 5, 2022 | IntelEstimated reading time: 4 minutes
Intel unveiled research breakthroughs fueling its innovation pipeline for keeping Moore’s Law on track to a trillion transistors on a package in the next decade. At IEEE International Electron Devices Meeting (IEDM) 2022, Intel researchers showcased advancements in 3D packaging technology with a new 10x improvement in density; novel materials for 2D transistor scaling beyond RibbonFET, including super-thin material just 3 atoms thick; new possibilities in energy efficiency and memory for higher-performing computing; and advancements for quantum computing.
“Seventy-five years since the invention of the transistor, innovation driving Moore’s Law continues to address the world’s exponentially increasing demand for computing. At IEDM 2022, Intel is showcasing both the forward-thinking and concrete research advancements needed to break through current and future barriers, deliver to this insatiable demand, and keep Moore’s Law alive and well for years to come,” says Gary Patton, Intel vice president and general manager of Components Research and Design Enablement
What’s Happening at IEDM: Commemorating the 75th anniversary of the transistor, Dr. Ann Kelleher, Intel executive vice president and general manager of Technology Development, will lead a plenary session at IEDM. Kelleher will outline the paths forward for continued industry innovation – rallying the ecosystem around a systems-based strategy to address the world’s increasing demand for computing and more effectively innovate to advance at a Moore’s Law pace. The session, “Celebrating 75 Years of the Transistor! A Look at the Evolution of Moore’s Law Innovation," takes place at 9:45 a.m. PST, Monday, Dec. 5.
Moore’s Law is vital to addressing the world’s insatiable computing needs as surging data consumption and the drive toward increased artificial intelligence (AI) brings about the greatest acceleration in demand ever.
Continuous innovation is the cornerstone of Moore’s Law. Many of the key innovation milestones for continued power, performance and cost improvements over the past two decades – including strained silicon, Hi-K metal gate and FinFET – in personal computers, graphics processors and data centers started with Intel’s Components Research Group. Further research, including RibbonFET gate-all-around (GAA) transistors, PowerVia back side power delivery technology and packaging breakthroughs like EMIB and Foveros Direct, are on the roadmap today.
At IEDM 2022, Intel’s Components Research Group showed its commitment to innovating across three key areas to continue Moore’s Law: new 3D hybrid bonding packaging technology to enable seamless integration of chiplets; super-thin, 2D materials to fit more transistors onto a single chip; and new possibilities in energy efficiency and memory for higher-performing computing.
Components Research Group researchers have identified new materials and processes that blur the line between packaging and silicon. We reveal critical next steps on the journey to extending Moore’s Law to a trillion transistors on a package, including advanced packaging that can achieve an additional 10x interconnect density, leading to quasi-monolithic chips. Intel’s materials innovations have also identified practical design choices that can meet the requirements of transistor scaling using novel material just 3 atoms thick, enabling the company to continue scaling beyond RibbonFET.
Intel introduces quasi-monolithic chips for next generation 3D packaging:
- Intel’s latest hybrid bonding research presented at IEDM 2022 shows an additional 10 times improvement in density for power and performance over Intel’s IEDM 2021 research presentation.
- Continued hybrid bonding scaling to a 3 um pitch achieves similar interconnect densities and bandwidths as those found on monolithic system-on-chip connections.
Intel looks to super-thin ‘2D’ materials to fit more transistors onto a single chip:
- Intel demonstrated a gate-all-around stacked nanosheet structure using 2D channel material just 3 atoms thick, while achieving near-ideal switching of transistors on a double-gate structure at room temperature with low leakage current. These are two key breakthroughs needed for stacking GAA transistors and moving beyond the fundamental limits of silicon.
- Researchers also revealed the first comprehensive analysis of electrical contact topologies to 2D materials that could further pave the way for high-performing and scalable transistor channels.
Intel brings new possibilities in energy efficiency and memory for higher-performing computing:
- To use chip area more effectively, Intel redefines scaling by developing memory that can be placed vertically above transistors. In an industry first, Intel demonstrates stacked ferroelectric capacitors that match the performance of conventional ferroelectric trench capacitors and can be used to build FeRAM on a logic die.
- An industry-first device-level model captures mixed phases and defects for improved ferroelectric hafnia devices, marking significant progress for Intel in supporting industry tools to develop novel memories and ferroelectric transistors.
- Bringing the world one step closer to transitioning beyond 5G and solving the challenges of power efficiency, Intel is building a viable path to 300 millimeter GaN-on-silicon wafers. Intel breakthroughs in this area demonstrate a 20 times gain over industry standard GaN and sets an industry record figure-of-merit for high performance power delivery.
- Intel is making breakthroughs on super-energy-efficient technologies, specifically transistors that don’t forget, retaining data even when the power is off. Already, Intel researchers have broken two of three barriers keeping the technology from being fully viable and operational at room temperature.
Intel continues to introduce new concepts in physics with breakthroughs in delivering better qubits for quantum computing:
- Intel researchers work to find better ways to store quantum information by gathering a better understanding of various interface defects that could act as environmental disturbances affecting quantum data.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.