Best Papers from SMTA International Announced
March 10, 2023 | SMTAEstimated reading time: 2 minutes
The SMTA is pleased to announce the Best Papers from SMTA International 2022. The winners were selected by members of the conference technical committee. For these exceptional achievements, a plaque is given to primary authors of all winning papers.
The following four papers were selected for the “Best of Proceedings” award:
Andrew Mawer, NXP Semiconductors, for the paper “Assembly and Reliability of a Novel High Density Dual Row MaxQFP." Co-authors include Mollie Benson, X.S. Pang, Stephen Lee, J.Z. Yao, Alvin Youngblood, NXP Semiconductors.
Keith Sweatman, Nihon Superior Co., Ltd., for the paper “Effect of Strain Rate on the Ductility of Bismuth-Containing Solders." Co-authors include Tetsuro Nishimura, Nihon Superior Co., Ltd.; Stuart McDonald, Xiaozhou Ye, Qichao Hao, Beatrice Negura, Xin Fu Tan, Kazuhiro Nogita, The University of Queensland.
Richard Coyle, Ph.D., Nokia Bell Labs, for the paper “Thermal Fatigue of QFN and Chip Resistor Solder Joints Assembled with SnPb, SAC305, and SnBi Solders." Co-authors include Faramarz Hadian, Eric Cotts, Binghamton University; Xinzhi Feng, Martin Anselm, Ph.D., Rochester Institute of Technology; Richard Popowich, Nokia; Lenora Clark, ESI Automotive.
Tim Pearson, Collins Aerospace, for the paper “Thermal Fatigue Reliability of a 1206 Chip Resistor with High-Performance Pb-Free Solder Alloys." The work was a joint effort by a large group of co-authors as part of the iNEMI Alternative Alloys Program and the High Density Package (HDP) User Group.
The following five papers received honorable mention:
Aileen Allen, HP Inc., for the paper “A Review of the Impact of Dopants in Sn-Bi Solder Alloys." Co-authors include Helen Holder, Elizabeth Benedetto, HP Inc.
Jean-Paul Clech, EPSI Inc., for the paper “Predicting the Saturation of Solder Joint Cycles to Failure with Thermal Cycling Dwell Times."
Richard Coyle, Ph.D., Nokia Bell Labs, for the paper “Improved Thermal Fatigue Reliability of SAC305 due to Mixed Metallurgy Assembly with a High-Performance Bi-Bearing Solder Paste." The work was a joint effort by a large group of co-authors as part of an iNEMI Project.
Tae-Kyu Lee, Ph.D., Cisco Systems, for the paper “Low Melting Temperature Solder Interconnect Thermal Cycling Performance Enhancement using Elemental Tuning." Co-authors include Kendra Young, Portland State University; Nilesh Badwe, Raiyo Aspandiar, Satyajit Walwadkar, Intel Corporation; Young-Woo Lee, Hui-Joong Kim, Junk-Tak Moon, MK Electron Co., Ltd.
Kevin Byrd, Intel Corporation, for the paper “Functional System Observations of Tin-Bismuth Low Temperature Solder Electromigration Behavior." Co-authors include Brian Franco, Intel Corporation.
The authors will receive their awards during a ceremony at SMTA International 2023. The SMTA International Conference and Exhibition (SMTAI) 2023 will be held October 9-12, 2023 at the Minneapolis Convention Center in Minneapolis, MN, USA. Details on participating in the 2023 SMTA International Conference are posted on SMTA's website.
Abstracts of all papers can be browsed directly in the online Knowledge Base. Featuring thousands of full-length technical articles, the SMTA Knowledge Base is searchable to all visitors, but free PDF downloads are available only to SMTA members. Non-members can easily join SMTA for real-time access to the Knowledge Base.
Suggested Items
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.