Research Team Realizes 3-Color Photodetector
April 25, 2016 | Northwestern UniversityEstimated reading time: 1 minute
While infrared waves are available in short, mid, and long lengths, most detection devices are unable to harness all three at the same time.
Now Northwestern University's Manijeh Razeghi and her team have developed a new approach in device design to realize a three-color, shortwave-midwave-longwave infrared photodetector. With the new design, the devices can detect different infrared wavebands by simply varying the applied bias voltage. This could open up a range of potential applications, including infrared color televisions and three-color infrared imaging.
"A device capable of detecting different infrared wavebands is highly desirable in the next generation infrared imaging systems," said Razeghi, Walter P. Murphy Professor of Electrical Engineering and Computer Science in Northwestern's McCormick School of Engineering.
Supported by DARPA, the Army Research Laboratory, Air Force Research Laboratory, and NASA, the team's finding were published on April 7 in Nature Scientific Reports.
Led by Razeghi, the researchers invented and investigated the new design for three-color photodiodes without using additional terminal contacts. The resulting photodetector is based on indium-arsenide/gallium-antimonide/aluminum-antimonide type-II superlattices.
As the applied bias voltage varies, the photodetector sequentially exhibits the behavior of three different colors, corresponding to the bandgap of three absorbers, and achieves well-defined cut-off wavelengths and high-quantum efficiency in each channel.
This new research builds on the Razeghi group's many years of work in Northwestern's Center for Quantum Devices, including the development of the first single-color, short-wavelength infrared photodetector and two-color, shortwave-midwave infrared photodetector based on type-II superlattices.
"I am fascinated by these results," Razeghi said. "The initial success in this demonstration will drive us to the new frontier of infrared detection and imaging technology."
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.