Sustainable Nanotechnology
May 3, 2016 | DTUEstimated reading time: 2 minutes
Corrosion protection with graphene
In a world where at least 3 % of the GDP of developed countries are being used to protect against or rebuild after corrosion, better barrier materials would make a large impact, prolonging the life time for the objects exposed to corrosion and reducing the consumption of resources.
Since its isolation in 2004, graphene has drawn huge attention due to its unique electrical properties, but more recently its mechanical and chemical properties are being more heavily investigated. Single layers of graphene are impermeable even for molecules as small as hydrogen, making graphene the perfect barrier.
When graphene protective coatings are taken out of the lab, however, things are less perfect. Even though graphene is the strongest material known relative to its size, a single atomic layer of any material is still easily damaged. When metal, graphene and a corrosive liquid are exposed at the same time, an electrochemical process called galvanic corrosion can in some cases even enhance the corrosion rate – and this may only show up after extended durations of time.
“However,” PhD Student Adam Stoot says “we can grow graphene directly on a catalytic metal surface, and when we use nickel, the graphene typically forms relatively thick coatings – with hundreds of layers. Even a 100 nm thick coating with 300 layers is still extremely thin compared to conventional, micrometre thick coatings for corrosion protection”.
Researchers from DTU Nanotech in collaboration with SP Group A/S have grown such multilayer graphene coatings and have proved longer term performance of graphene coatings in highly corrosive boiling saline solutions. An effective and also conducting coating can have a profound impact in several application areas such as fuel cells, batteries, sensors and contacts.
Test chip with several CZTS solar cells and their metal contacts. Cell thickness is 2 micrometres.
Thin film solar cells
In solar cells, the materials responsible for converting sunlight into electricity are semiconductors. In those materials, first, electrons have to overcome a moderate energy gap by exploiting the energy of sunlight, and then, they can contribute to the electric current in the solar cell.
The current standard solar cell semiconductor, silicon, has an energy gap of the indirect type. As predicted by quantum mechanics, an indirect gap allows only weak absorption of light. Therefore, silicon needs to be at least 200 micrometres thick to absorb all sunlight. On the other hand, sulphur based semiconductor compounds such as Cu2ZnSnS4 (CZTS) or Cu2SnS3 (CTS) have an energy gap of the direct type. They absorb light more than 200 times better than silicon and their thickness can be cut down to 0.8 micrometres, thus saving a lot of resources. For this reason, we call them "thin-film solar cells".
Still, the actual laboratory efficiency of CZTS and CTS is mostly below 10%, whereas silicon excels with 25% in large scale production. PhD student Andrea Crovetto explains that “to improve the efficiency, we need to address a major challenge with these materials, namely the phase purity. Because there are many chemical elements involved in those compound semiconductors, we have to find synthesis methods that result in the correct, pure material with fairly large crystals so that crystal defects and loss of light-excited electrons are reduced”.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.