Silver Nanowires Are an Ideal Material for Current and Future Flexible Touch-screen Technologies
May 16, 2016 | University of SurreyEstimated reading time: 2 minutes
Research published in the journals Materials Today Communications and Scientific Reports has described how silver nanowires are proving to be the ideal material for flexible, touch-screen technologies while also exploring how the material can be manipulated to tune its performance for other applications. Currently, touch screen devices mainly rely on electrodes made from indium tin oxide (ITO), a material that is expensive to source, expensive to process and very brittle.
A team from the University of Surrey, led by Professor Alan Dalton and in collaboration with M-SOLV Ltd, a touch-sensor manufacturer based in Oxford, looked to alternative materials to overcome the challenges of ITO, which is suffering from supply uncertainty. Alternative materials investigated as ITO replacements have included graphene, carbon nanotubes and random metal nanowire films. This study showed how silver nanowire films have emerged as the strongest competitor, due to transmittances and conductivities which can match and readily exceed those of ITO. This is a material that consists of wires which are over a thousand times thinner than a human hair, that form an interconnected conductive network.
Showcasing a new process
Matthew Large, the first author on the research published in Scientific Reports described the importance of these latest results. “Our research hasn’t just identified silver nanowires as a viable replacement touchscreen material, but has gone one step further in showing how a process called ‘ultrasonication’ can allow us to tailor performance capabilities. By applying high frequency sound energy to the material we can manipulate how long the nanosized ‘rods’ of silver are. This allows us to tune how transparent or how conductive our films are, which is vital for optimising these materials for future technologies like flexible solar cells and roll-able electronic displays.”
In a paper published last month in Materials Today Communications, the same team, showed how silver nanowires can be processed using the same laser ablation technique commonly used to manufacture ITO devices. Using this technique, the team produced a fully operating five inch multi-touch sensor, identical to those typically used in smartphone technology. They found it performed comparably to one based on ITO but used significantly less energy to produce.
“Not only does this flexible material perform very well, we have shown that it is a viable alternative to ITO in practical devices,” concluded Professor Dalton. “The fact we are able to produce devices using similar methods as currently in use, but in a less energy-intensive way is an exciting step towards flexible gadgets that do not just open the door for new applications, but do so in a much greener way.”
An easy to deploy alternative
Maria Cann, a technologist from M-SOLV and first author on the Materials Today Communications paper added ““We are seeing a lot of interest from our customers in silver nanowire films as an ITO replacement in devices. This work is a really important step in establishing exactly which sensor designs can make good nanowire products. The fact that the nanowire films are processed by the same laser techniques as ITO makes the transition from ITO to nanowires really straightforward. It won’t be long before we are all using nanowires in our electronic devices. ”
The team, now based at the University of Sussex is now looking to develop the scalability of the process to make it more industrially viable. One limiting factor is the current cost of silver nanowires. Funded by Innovate UK and EPSRC, the team are collaborating with M-SOLV and a graphene supplier Thomas Swan to use a nanowire and graphene combination in the electrodes to markedly reduce the cost.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.