Roach-like Robots Run, Climb and Communicate with People
June 15, 2016 | NSFEstimated reading time: 7 minutes
Insects make themselves at home in the most unwelcoming terrain: on steep inclines, in dark crevices, under shaky rubble.
While their ability to go just about anywhere can be disturbing at times, electrical engineer Ronald Fearing sees their talent as inspiration for a special breed of robots that can fit in your hand and help in emergency situations.
“Living in earthquake country in California,” Fearing says, “it’s frustrating to know people will be trapped after a building collapse. We have an indeterminate amount of time to find someone before they may die. Small robots would allow us to get in and communicate fairly quickly.”
Since the 1990s, Fearing has been developing biomimetic robots capable of remarkable feats of speed and maneuverability. With his team at the University of California, Berkeley, he designs robots to share traits with insects, lizards and other animals.
With NSF funding through the National Robotics Initiative (NRI), Fearing now creates biologically inspired teams of robots that can cover rough ground while sending information to and receiving guidance from search and rescue personnel.
“The NRI project allows us to see how robots can do something useful, with robots working together and with people as well,” Fearing says.
Quick as a cockroach
The indomitable cockroach serves as one insect model for his group’s designs. Fearing and his colleagues made a series of robots about 3-10 centimeters long (roughly 1-4 inches) that move like the common cockroach Periplaneta Americana, sharing its gait stride frequency and other dynamics.
To create the miniRoACH (RObotic Autonomous Crawling Hexapod), Fearing and graduate students Aaron Hoover and Erik Steltz invented using the smart composite microstructure (SCM) process. SCM is a rapid prototyping method in which rigid structure and movable joints are laser cut from a single sheet of material and then folded into position. Using this method, designers can create complicated machines, such as robots, quickly and inexpensively. (Watch construction of a robot using SCM.)
The 3 cm miniRoACH, is slow. Fearing and graduate student Duncan Haldane, with fellow students Fernando Garcia Bermudez and Kevin Peterson, adapted the movement of the original RoACH for the larger VelociRoACH, a 10 cm robot that can run almost 3 meters per second (approximately 6 mph).
The VelociRoACH research was made possible by an NSF Integrative Graduate Education and Research Traineeship (IGERT) award to teach biology and engineering students to learn from natural design.
To allow another model, the X2-VelociRoACH, to go faster than nature’s design, Fearing and Haldane added a bigger motor and more power to increase stride frequency. In 2015, the little robot reached speeds up to 5 meters per second (approximately 11 mph), making it the fastest legged robot relative to its size. (Watch the X2-VelociRoACH zoom by.)
Having mastered fast movement in flat, open environments, the researchers’ current challenge involves locomotion in tough environments with little open space, obstacles everywhere and no clear paths through. The robots need to explore in order to reach their destinations.
Robots offer a helping tether
Typical rescue robots are designed for particular terrain, require costly motors and joints, and are much larger and heavier (weighing several kilograms rather than the 50 grams of VelociRoACH). Fearing and his collaborators use less complicated, more versatile designs for robots that work together. One key question guides that focus on adaptability and robotic cooperation: What if robots encounter an obstacle they’ve never seen before?
“If you think about people, if you send a single person to explore and they encounter a 12-foot high fence, they are stuck,” Fearing says. “But if you send two people, the first can boost the second one up, and then the second can pull the first one up.”
Fearing and his team study strategies that teams of robots can use to overcome a variety of obstacles. Ants provided some inspiration, as they often collaborate (for example, by stepping on each other) to get where they need to go.
Together with graduate student Carlos Casarez, Fearing recently tested a strategy for robots that aren’t specifically designed to climb or step over obstacles. The researchers outfitted two VelociRoACH robots with radios, leg-position sensors, gyroscopes and accelerometers to help them orient themselves. They also gave the VelociRoACHes a small tether and winch system, giving them the ability to latch onto and pull one another. The team then investigated how “motion primitives” — simple, combinable actions — could allow the VelociRoACHes to mount a step together.
Like small words arranged to create entire sentences, motion primitives can be combined to accomplish a variety of tasks. The researchers demonstrated that with the right primitives, arranged in the right order, the robot team couldcooperate to reach the top of a step, then disconnect and continue exploring separately.
Page 1 of 2
Suggested Items
Walmart Acquires Vizio, Set to Overtake Samsung as the Largest TV Brand in the US
02/22/2024 | TrendForceUS retail giant Walmart announced on February 20, that it has acquired smart TV brand Vizio for US$2.3 billion, aiming to accelerate the growth of its advertising business: Walmart Connect. Since its launch in 2021, Walmart Connect has seen double-digit annual growth in both its online and offline retail media advertising ventures. Vizio has been expanding its device ecosystem and its SmartCast TV OS, boasting over 18 million active users, according to TrendForce.
Fiber Optic Cables Effective Way to Detect Tsunamis
02/16/2024 | University of MichiganFiber optic cables that line ocean floors could provide a less expensive, more comprehensive alternative to the current buoys that act as early warning systems for tsunamis, says a University of Michigan researcher.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.
IDTechEx Discusses Whether Fuel Cell Vehicles Will Succeed and What It Would Take
02/12/2024 | PRNewswireThe sales of hydrogen fuel cell cars have largely stalled from 2021 onwards, but does this mean there is no market for fuel cell electric vehicles (FCEVs) in the future, and what is required to make them a success? IDTechEx's report, "
Electronics Industry Mourns Loss of Colleague and Visionary Michael Ford
01/31/2024 | I-Connect007Sadly, longtime I-Connect007 columnist, industry visionary, and friend Michael Ford passed away Jan. 27. “In this time of sorrow, we can take solace in the knowledge that Michael leaves a great legacy of contribution to the electronics industry,” according to a statement from Aegis Software. Michael was senior director of emerging industry strategy at Aegis. He was a prolific writer and speaker whose work and ideas put him at the forefront of electronics manufacturing. Working for Aegis gave him the opportunity to apply his software for electronics manufacturing experience to further drive technology solution innovation.