Driving Toward More Efficient Solar Cells
July 8, 2016 | NC State UniversityEstimated reading time: 2 minutes
For solar energy to become a real power player in the energy game, solar cells need to be both inexpensive to manufacture and efficient in terms of energy they collect. That’s why researchers are focusing their efforts on organic solar cells, which use non-fullerene polymers. These organic polymers are less expensive to produce and some of them, according to some new findings from researchers at NC State and the Hong Kong University of Science and Technology, may have comparable efficiency to their fullerene-based brethren.
NC State physicist Kenan Gundogdu was part of an international team that produced organic solar cells with fast charge separation and low voltage loss.
Why is this important? Well, first you have to understand how solar cells work. When sunlight hits a solar cell it is absorbed by the materials in the cell. The light excites these materials, creating a particle called an exciton. The exciton gets split into two charges – an electron (negative) and a hole (positive) – at the interface of two different materials (called donor and acceptor), and then the charges travel to electrodes for collection. Collect enough of these charges, and voila! You can keep the lights on.
However, efficiency is a problem. There are numerous reasons for this, but Gundogdu and colleagues were interested in voltage loss caused by something called the driving force. Since electrons and holes are positively and negatively charged, they attract each other. In organic electronic materials the binding of these particles is so strong that some driving force is necessary to split them. Generally that force comes from the difference in electron and hole attraction preferences of the donor and acceptor materials inside the solar cell. For instance, donor materials will attract holes but not electrons, which leads to separation of the charges at the interface.
Traditionally, a fairly high driving force has been necessary to separate the charges in organic solar cells. The higher the driving force, the faster the charge separation, which sounds like a good thing. But there is no free lunch in physics. With faster charge separation comes more voltage loss, which means the solar cell loses efficiency.
But in new findings that were published online in Nature Energy, the research team created an organic solar cell with both a low driving force and low voltage loss. The solar cell also operated at 9.5 percent efficiency (for comparison, the best fullerene polymer solar cells operate at a bit under 11 percent).
“We are one step closer to realizing inexpensive organic photovoltaic cells with similar performance to traditional commercial solar cells,” says Gundogdu. “These findings also improve our understanding of how solar cells work on the molecular level.”
The research was funded by the Department of Naval Research and the Department of Energy. Jing Liu and Shangshang Chen of the Hong Kong University of Science are lead authors on the paper. Gundogdu, Hong Kong’s He Yan and Feng Gao of Sweden’s Lingkoping University are the corresponding authors. NC State physicist Harald Ade and postdoctoral research scholar Bhoj Gautam also contributed to the work.
NC State News | Tracey Peake
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.