The Hot Attraction of Gold
July 27, 2016 | Tohoku UniversityEstimated reading time: 1 minute
Gold had long been considered a non-magnetic metal. But researchers at Tohoku University recently discovered that gold can in fact be magnetized by applying heat.
They discovered that an electron spin - the origin of magnetism - plays an important role in a material's functionality at a non-constant temperature, where the magnetization and the heat flow interact. A subsequent experiment confirmed, for the first time, that magnetization in gold can be induced by the heat flow driven by a temperature change.
The set up of the experiment was quite simple, involving a bilayer comprising Yttrium iron garnet (YIG), which is an insulator magnet, and a thin film of gold. (Fig below).
In the experiment, the temperature of the YIG side and that of the gold side were kept different to drive a heat flow perpendicular to the bilayer. In addition, a magnetic field was applied in parallel to the heat flow. Under this condition, the Hall voltage*1 was measured in the gold film by in-plane electric current. The Hall voltage showed a clear proportional dependence on the applied temperature gradient.
The team interpreted this Hall voltage as evidence of the evolution of magnetization in the thin gold film due to the heat flow. The Hall voltage was named as a non-equilibrium anomalous Hall effect (nAHE).
"We are excited about the potential of this measurement as a standard method of detecting non-equilibrium magnetization because there's no need for complicated processing and technologies as compared to other highly sensitive magnetometry," says researcher Dazhi Hou. "On top of that, we can detect extremely small magnitudes of magnetization in this measurement. Such small magnetizations is the key to revealing as-yet-unknown useful properties of matters."
"These findings are expected to contribute to the development of innovative spintronics in the use of thermoelectric applications, like energy harvesting, adds Professor Eiji Saitoh, who led the research.
Details of this study were published online on July 26, 2016 in Nature Communications.
This research was achieved as part of JST-ERATO "Spin Quantum Rectification Project" led by Professor Eiji Saitoh.
Suggested Items
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Indium Corporation to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
02/28/2024 | Indium CorporationAs a materials pioneer and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 20-22, in Shanghai.
UL-Authorization Received for Ventec High-CTI, Halogen Free FR15.1 Substrates VT-447C and VT-441C
02/27/2024 | VentecVentec International Group Co., Ltd. , is pleased to announce that UL’s evaluation of two of Ventec’s halogen-free, phenolic cured high-CTI substrates have received authorization to apply the UL mark.
KIC to Discuss Revolutionary Contact-less Thermal AnalysisTM at SMTA Dallas Expo and Tech Forum
02/09/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, will exhibit its latest breakthrough technology, Contact-less Thermal AnalysisTM, at the SMTA Dallas Expo and Tech Forum.
AIM to Highlight NC259FPA Ultrafine Solder Paste & Present on Low Temp Solder at IPC APEX 2024
02/09/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming IPC APEX EXPO 2024 taking place April 9-11 at the Anaheim Convention Center in Anaheim, California.