Public Safety Increased With the Ability to Remotely Disable Vehicles
August 1, 2016 | CORDISEstimated reading time: 3 minutes
In its endeavour to keep the public safe, one of the key challenges facing European security services is the ability to control and stop, at distance, non-cooperative vehicles posing a threat. However, this ability presents more than a technical challenge. To comply with EU legislation, as well as adhere to ethical concerns, the technology would also have to be safe for the user, the driver (and passengers), as well as members of the public and the material infrastructure of the surrounding environment.
The SAVELEC (Safe control of non cooperative vehicles through electromagnetic means) project developed a prototype device, after testing signals (magnetic pulses and microwave), which interfered with key car components, forcing it to slow down and stop. With the contribution of security forces as the ultimate end users, the researchers were able to simulate the technology’s use in realistic scenarios.
Prototype device for a variety of security scenarios
SAVELEC first set up an end-user advisory panel comprising of law enforcement agencies and associated security organisations from different European countries, to better understand the likely operating environment for any technology developed. Scenarios were identified in terms of operational distance, target speed, distance to nearby persons and any immediate environmental considerations. As the project’s coordinator, Dr. Marta Martínez Vázquez points out, ‘This analysis included land and maritime missions, with the device implemented on a ground, seaborne or airborne platform.’
Developing the technology itself first required a review and cost analysis of what was currently available on the market, as well as establishing the car components best targeted for remote interference. In lab bench testing SAVELEC evaluated signal frequency, waveform and duration - principally of electromagnetic pulses (EMP) and high power microwaves (HPM) - to determine which could best disrupt the functioning of a vehicle’s electronic components.
Assessing the project’s success, Dr. Martínez Vázquez asserts that, ‘An EMP/HPM car-stopping device prototype at a breadboard level was designed, fabricated and tested. Its performance was successfully demonstrated in an open field controlled track, in of the presence of SAVELEC affiliated end-users’. The capacity of the prototype also surpassed expectations. ‘It demonstrated the functionality of the whole device, with a car moving on an open air track,’ she comments. ‘Conservative expectations had been to only demonstrate a sub-system of the device, or the whole system, but with a stationary car.’
The project also used the simulated environment to investigate the wider impact of the technology on humans and materials. For example, it looked at driver reactions to loss of vehicle control under six different scenarios including high speed, dense traffic and narrow roads, involving over 70 volunteers. A literature review of previous results allowed the assessment of the likelihood of petrol tank explosions from electromagnetic exposure or damage to airbags. Additionally, it assessed three different electromagnetic exposure scenarios for the pedestrian/bystander, car driver and device operator to ascertain safety limits.
Beyond proof-of-concept
A core outcome of the project, with the help of the European security forces and an Independent Ethics Advisory Board, was a regulatory framework proposal within which this technology could function. The framework included compatibility with European legislation which ensures the safety of all those exposed to electromagnetism.
For the prototype device to progress beyond the successful proof-of-concept stage, there are two principal challenges which would have to be overcome. ‘Further investigation should concentrate on the miniaturisation of the different components, and in extending its operational range (by increasing the power that can be generated),’ Dr. Martínez Vázquez says. She also recommends that different car models should be tested, as SAVELEC concentrated on only one. There should also be further investigation on human health and safety implications.
Whilst SAVELEC specifically tested the technology on cars, it could easily be adapted to other vehicles such as fast vessels, trucks or motorbikes. The project’s results have also contributed to improvements in other fields, such as the study of human exposure to electromagnetic fields and the development of better driving simulators.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.