Irish Reseachers Have Developed a Simpler Process to Produce Germanium-tin Nanowires
August 22, 2016 | AMBEREstimated reading time: 1 minute
Researchers in AMBER, the Science Foundation Ireland funded materials science centre, hosted in Trinity College Dublin, have created a simpler process to produce germanium-tin nanowires (germanium is a semiconductor with superior electronic properties compared with silicon). The research breakthrough recently published in the prestigious scientific journal Nature Communications describes this new process as essential in potentially enabling the production of an entirely new generation of faster, smaller and greener electronic devices.
The research team at AMBER have successfully fabricated highly crystalline, germanium–tin nanowires. The nanowires were grown from a simple, cheap and scalable gas-phase process employing a unique combination of chemical reactions developed by the AMBER team in Ireland. Importantly, the nanowires produced are expected to lead to electronic devices that are up to 125 times more power efficient than conventional devices due to the unique electrical properties of germanium-tin, ultimately resulting in smarter and greener electronic gadgets, such as mobile phones, tablets, sensors and smart watches.
Professor Justin Holmes, Investigator at AMBER and Professor of Nanochemistry at University College Cork, said: “This is a significant advancement in the field of nanostructure research and opens up new possibilities for the development of future technologies. Current mobile devices based on existing technology are energy inefficient, due to high power consumption and the dissipation of a large amount of heat, leading to wasteful battery usage or the requirement for elaborate cooling systems. In the field of electronics and optics, manipulation of nanoscale structures should lead to more energy efficient phones and computers.”
Nanowires are similar to normal electrical wires but are extremely small, typically thinner than one thousandth of the thickness of a human hair. Just like normal wires, nanowires can be made from a variety of different materials, including metals such as copper and gold or semiconductors such as silicon and germanium.
Nanowires often exhibit unique optical, electrical and even mechanical properties that are not found in bulk materials, making them very attractive for a range of applications that include chemical and biological sensors, computer circuitry and light emitting diodes (LEDs). Notably, increasing the number of nanowire switches (or transistors) on a silicon chip enables the production of faster, smaller and more mobile electronic devices.
The AMBER team are currently in collaboration with industrial partners to demonstrate the commercial viability of nanowire-based energy efficient electronic and optical devices within a 5-year timeframe.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: