Lasers of the Future to be Developed by Southampton Scientist
September 28, 2016 | University of SouthamptonEstimated reading time: 1 minute
New fibre-optic lasers that can deliver high-power beams efficiently over long distances are to be developed by a new Royal Academy of Engineering Research Chair at the University of Southampton, with support from SPI Lasers.
Professor Michalis Zervas, of the University’s Optoelectronic Research Centre, will build on his years of research in high-power fibre lasers to develop the next generation of laser technology, which will exploit novel features of fibre lasers to be used in manufacturing.
The SPI Lasers / Royal Academy of Engineering Chair in Advanced Fibre Laser Technologies for Future Manufacturing will develop new passive and active fibre technologies, with precisely engineered materials to make fibre-optic lasers 'smarter', more stable and efficient. This includes using novel composite materials for both the inner core and the outer cladding of the fibres, as well as doping – deliberately introducing impurities into the fibres to enhance their performance.
The new technologies will enable the scaling up of powerful fibre lasers with added functionality but a smaller footprint. This allows precise control over the shape of the laser beam, its polarisation, and wavelength – features that can be exploited in new laser manufacturing tools for precise welding, cutting and additive manufacturing.
The new generation of fibres will also enable laser light to be delivered over long distances without impairments, enabling smart deployment in industrial settings where flexible, reconfigurable and fully automated factories are increasingly using robotics to remotely deliver laser power.
Professor Zervas said: “I am delighted to have been awarded this prestigious Research Chair and the opportunity that comes with it to work closely with the Royal Academy and SPI Lasers to develop the next generation of industrial laser manufacturing tools.
“Looking further into the future, the next stage of our research will aim to provide stable 10s to 100kW beams over long distances, and take fibre lasers to where other types of laser cannot go. In addition to intelligent manufacturing, these high-power lasers could also have important national security applications.”
Professor Ric Parker CBE FREng, Chair of the Academy’s Research Committee, said: “Professor Zervas brings together the expertise in materials, optics and electronics that is necessary to engineer the next generation of powerful, smart lasers. The Royal Academy of Engineering is delighted to support him as a new Research Chair, and we look forward to seeing how advances in this technology will be deployed in industry of the near future.”
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.