PMI at 51.5%; September Manufacturing ISM Report On Business
October 4, 2016 | PRNewswireEstimated reading time: 4 minutes
Economic activity in the manufacturing sector expanded in September following one month of contraction in August, and the overall economy grew for the 88th consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report On Business.
The report was issued today by Bradley J. Holcomb, CPSM, CPSD, chair of the Institute for Supply Management (ISM) Manufacturing Business Survey Committee. "The September PMI registered 51.5%, an increase of 2.1 percentage points from the August reading of 49.4%. The New Orders Index registered 55.1%, an increase of 6 percentage points from the August reading of 49.1%. The Production Index registered 52.8%, 3.2 percentage points higher than the August reading of 49.6%. The Employment Index registered 49.7%, an increase of 1.4 percentage points from the August reading of 48.3 percent. Inventories of raw materials registered 49.5 percent, an increase of 0.5 percentage point from the August reading of 49%. The Prices Index registered 53% in September, the same reading as in August, indicating higher raw materials prices for the seventh consecutive month. Manufacturing expanded in September following one month of contraction in August, with nine of the 18 industries reporting an increase in new orders in September (up from six in August), and 10 of the 18 industries reporting an increase in production in September (up from eight in August)."
SEPTEMBER 2016 MANUFACTURING INDEX SUMMARIES
PMI
Manufacturing expanded in September as the PMI® registered 51.5%, an increase of 2.1 percentage points from the August reading of 49.4%, indicating growth in manufacturing following one month of contraction. A reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.
A PMI® above 43.2%, over a period of time, generally indicates an expansion of the overall economy. Therefore, the September PMI® indicates growth for the 88th consecutive month in the overall economy, and indicates growth in the manufacturing sector following one month of contraction. Holcomb stated, "The past relationship between the PMI® and the overall economy indicates that the average PMI® for January through September (50.9%) corresponds to a 2.4% increase in real gross domestic product (GDP) on an annualized basis. In addition, if the PMI® for September (51.5%) is annualized, it corresponds to a 2.6% increase in real GDP annually."
New Orders
ISM's New Orders Index registered 55.1% in September, which is an increase of 6 percentage points when compared to the 49.1% reported for August, indicating growth in new orders following one month of contraction. A New Orders Index above 52.2%, over time, is generally consistent with an increase in the Census Bureau's series on manufacturing orders (in constant 2000 dollars).
The nine industries reporting growth in new orders in September — listed in order — are: Wood Products; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; Nonmetallic Mineral Products; Computer & Electronic Products; Furniture & Related Products; Fabricated Metal Products; Paper Products; and Machinery. The six industries reporting a decrease in new orders during September — listed in order — are: Apparel, Leather & Allied Products; Printing & Related Support Activities; Transportation Equipment; Electrical Equipment, Appliances & Components; Chemical Products; and Textile Mills.
Production
ISM's Production Index registered 52.8% in September, which is an increase of 3.2 percentage points when compared to the 49.6% reported for August, indicating growth in production in September following one month of contraction. An index above 51.3%, over time, is generally consistent with an increase in the Federal Reserve Board's Industrial Production figures.
The 10 industries reporting growth in production during the month of September — listed in order — are: Miscellaneous Manufacturing; Nonmetallic Mineral Products; Computer & Electronic Products; Furniture & Related Products; Food, Beverage & Tobacco Products; Primary Metals; Petroleum & Coal Products; Plastics & Rubber Products; Chemical Products; and Paper Products. The eight industries reporting a decrease in production during September — listed in order — are: Wood Products; Apparel, Leather & Allied Products; Printing & Related Support Activities; Machinery; Fabricated Metal Products; Electrical Equipment, Appliances & Components; Transportation Equipment; and Textile Mills.
Employment
ISM's Employment Index registered 49.7% in September, an increase of 1.4 percentage points when compared to the August reading of 48.3%, indicating contraction in employment in September for the third consecutive month. An Employment Index above 50.6%, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.
Of the 18 manufacturing industries, the seven industries reporting employment growth in September — listed in order — are: Textile Mills; Nonmetallic Mineral Products; Electrical Equipment, Appliances & Components; Furniture & Related Products; Food, Beverage & Tobacco Products; Paper Products; and Computer & Electronic Products. The eight industries reporting a decrease in employment in September — listed in order — are: Petroleum & Coal Products; Transportation Equipment; Primary Metals; Fabricated Metal Products; Plastics & Rubber Products; Chemical Products; Machinery; and Printing & Related Support Activities.
Supplier Deliveries
The delivery performance of suppliers to manufacturing organizations was slower in September as the Supplier Deliveries Index registered 50.3%, which is 0.6 percentage point lower than the 50.9%reported for August. A reading below 50% indicates faster deliveries, while a reading above 50% indicates slower deliveries.
The seven industries reporting slower supplier deliveries in September — listed in order — are: Nonmetallic Mineral Products; Furniture & Related Products; Paper Products; Machinery; Food, Beverage & Tobacco Products; Chemical Products; and Primary Metals. The four industries reporting faster supplier deliveries in September are: Petroleum & Coal Products; Fabricated Metal Products; Plastics & Rubber Products; and Computer & Electronic Products. Seven industries reported no change in supplier deliveries in September compared to August.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.