Make No Assumptions in Building a Better Battery
December 1, 2016 | Pacific Northwest National LaboratoryEstimated reading time: 1 minute
Ultra-low cost rechargeable batteries could store sporadic wind and other energy sources until needed. A zinc-based battery seemed promising, but it quickly failed. Scientists discovered a reversible chemical conversion reaction mechanism, similar to what powers lead-acid car batteries. They used the reaction to manipulate the chemical balance inside the battery. The modified battery could be charged and discharged over 5,000 cycles, while retaining 92 percent of its initial storage capacity.
Large-scale energy storage for wind and other intermittent sources could make renewable energy easier to use. The research showed that rechargeable zinc-manganese oxide could be a more viable solution than today’s lithium-ion and lead-acid batteries. In addition, the zinc-based batteries use abundant, inexpensive, and environmentally friendly materials.
Zinc-manganese oxide rechargeable batteries have been studied for more than 20 years, but the batteries usually stop working after a limited number of charge-discharge cycles. Researchers at Pacific Northwest National Laboratory asked “why?” Most researchers had assumed that rechargeable zinc-based batteries work via a mechanism similar to rechargeable lithium-ion batteries. They assumed that during use the charged atoms (ions) move in and out of microscopic regions within the battery. However, they found that zinc-manganese oxide batteries have a reversible chemical reaction. In this reaction, one material is transformed into another, similar to the chemistry in lead-acid batteries. They found the manganese oxide on the positive electrode reversibly reacted with protons from the water-based electrolyte, zinc sulfate, to form manganese oxyhydroxide and zinc hydroxyl sulfate. The team made these findings using instruments at the Environmental Molecular Sciences Laboratory, a U.S. Department of Energy scientific user facility. By understanding the inner workings of the batteries, they found that an optimal concentration of manganese sulfate added to the electrolyte suppressed the manganese ion dissolution reaction and stabilized the electrode. The addition slowed the degradation of the battery during use. The result was a better battery. It has a capacity of 285 mAhg-1, a much higher energy density than what lead-acid batteries offer. It retains 92 percent of this capacity after 5,000 charge cycles. This finding opens new opportunities for the development of low-cost, high-performance rechargeable aqueous batteries to store renewable energy for later use in the electrical grid.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
LPKF Extends Contract of CEO Klaus Fiedler until 2028
04/24/2024 | LPKFThe Supervisory Board of LPKF Laser & Electronics SE has decided to extend the contract of Dr. Klaus Fiedler as CEO until 31 December 2028. "Under the leadership of Klaus Fiedler, LPKF has undergone some extensive transformation since he joined just over 2 years ago.
Women MAKE Awards Recognizes GlobalFoundries’ Jennifer Robbins and Katelyn Harrison for Manufacturing Excellence
04/24/2024 | GlobalFoundriesThe Manufacturing Institute (MI)—the workforce development and education affiliate of the National Association of Manufacturers—honored two outstanding women from GlobalFoundries (GF) at their annual Women MAKE Awards. Jennifer (Jenny) Robbins, Senior Director, Central Facilities, was recognized as a 2024 Women MAKE Awards Honoree, while Katelyn Harrison, Senior Integration Engineer, was honored as an Emerging Leader.