Number of IC Manufacturers Using 300mm Wafers Less than Half Using 200mm Wafers
December 20, 2016 | IC InsightsEstimated reading time: 1 minute
IC Insights has just released its new "Global Wafer Capacity 2017-2021—Detailed Analysis and Forecast of the IC Industry’s Wafer Fab Capacity" report. Shown below is a brief excerpt from that report.
Prior to 2008, the 200mm wafer was used in more cases for manufacturing ICs than any other wafer size. However, since 2008, the majority of IC fabrication has taken place on 300mm wafers. Rankings of IC manufacturers by installed capacity for each of the wafer sizes are shown in Figure 1. The chart also compares in a relative manner the amounts of capacity held by the top 10 leaders.
Figure 1
Looking at the ranking for 300mm wafers, it is not surprising that the list includes only DRAM and NAND flash memory suppliers like Samsung, Micron, SK Hynix, and Toshiba/Western Digital; the world’s five largest pure-play foundries TSMC, GlobalFoundries, UMC, Powerchip, and SMIC; and Intel, the industry’s biggest IC manufacturer (in terms of revenue). These companies offer the types of ICs that benefit most from using the largest wafer size available to best amortize the manufacturing cost per die, and have the means to continue investing large sums of money in new and improved 300mm fab capacity.
The leaders in the 200mm size category consist of pure-play foundries and manufacturers of analog/mixed-signal ICs and microcontrollers.
The ranking for the smaller wafer sizes (i.e., ≤150mm) includes a more diversified group of companies. STMicroelectronics has a huge amount of 150mm wafer capacity at its fab site in Singapore, but the company has been busy converting this production to 200mm wafers. Another STMicroelectronics 150mm fab in Catania, Italy, is also undergoing a conversion to 200mm wafers, with plans for that project to be completed in 2017.
A significant trend regarding the industry’s IC manufacturing base, and a challenging one from the perspective of companies that supply equipment and materials to chip makers, is that as the industry moves IC fabrication onto larger wafers in bigger fabs, the group of IC manufacturers continues to shrink in number (Figure 2).
Today, there are less than half the number of companies that own and operate 300mm wafer fabs than 200mm fabs. Moreover, the distribution of worldwide 300mm wafer capacity among those manufacturers is becoming increasingly top-heavy.
Figure 2
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.