Consistent-Chirality Carbon Nanotube Tangles with High On-Current in Transistors
December 28, 2016 | Tsinghua UniversityEstimated reading time: 3 minutes
Carbon nanotubes (CNTs) are expected to replace silicon as the next generation semiconductor materials owing to their perfect structure and excellent properties. IBM has proposed a technical standard for CNT-based electronics, which singled out the necessity of a high density of up to 125 CNTs µm-1 in tandem with a high semiconducting selectivity of up to 99.9999% for single-walled CNT arrays.
Schematic illustration of the synthesis of CNT tangles assisted with acoustic waves.
Therefore, in the past decades, great effort has been applied on the controllable synthesis of ideal CNTs.
However, it’s almost impossible to directly synthesize pure semiconducting CNTs by an in situ catalytic reaction alone, without any post-separation, when only small amounts of metallic CNTs may cause catastrophic device shorting failures.
That is why the synthesis of CNTs with consistent chirality and high density is facing a bottleneck.
A group of researchers in China have creatively proposed a novel method by entangling an individual decimeter-long CNT with a diameter of 2 nm into a large tangle with high density and consistent chirality.
The team, led by professor Fei Wei from Tsinghua University, has published their findings in ("Acoustic-assisted assembly of an individual monochromatic ultralong carbon nanotube for high on-current transistors").
"Controlled growth of CNTs with high quality has always been our research focus," says Pro. Wei, whose team, in previous work, has achieved record high thousand-ton output of CNTs and synthesized the half-meter long CNTs. "We have demonstrated the chiral-consistency of an individual decimeter-long CNT, but these as-synthesized horizontally aligned ultra long CNTs possess different chirality and tip-growth-mode-determined low density." "The motivation for this work has been to change the problem of manipulating or separating individual nanotubes into an easier problem for millimeter scale tangles," he continues. "Besides, it also provides a novel paradigm for the synthesis of chirality-specific CNT aggregates."
"Assisted by acoustic waves, we curled each individual ultra long CNT into large tangles and the key for realizing the entanglement is our newly-designed layered rectangular reactor," says Zhenxing Zhu, a doctor at Tsinghua University and the paper’s first author. "Gas flow stability is important for controlling the horizontally aligned morphology for ultra long CNTs synthesized via the chemical vapor deposition method. The new reactor designed with a large width-to-height aspect ratio led to a reduction of velocity fluctuation and a significantly stabilized gas flow during the reaction. So the floating CNTs will get more sensitive to external interference and easily curl into tangles under the effect of acoustic waves."
"Another benefit of this new reactor is the capability of wafer-scale synthesis of ultra long CNTs. We characterized ultra long CNTs and tangles directly on silicon wafers with Rayleigh or Raman spectra, indicating the chiral-consistency and monochromatic," Pro. Wei adds. "The scale of tangles is closely related to frequency of sound and gas velocity, which can be described with a Strouhal number model initially used for tail or wing kinematics of swimming and flying animals. We think this minimally consumed energy phenomenon also exists at the nanoscale."
As the researchers showed, these tangles made of triple-walled CNTs possess an area ranging from 1×104 to 3×104 µm2 and a density of 1000 segments per 100 µm.
Despite of that, transistors fabricated with one CNT tangle showed an on/off ratio of 103 to 106 with 4-mA on-state current, showing a feasible method for compatibility between high semiconducting purity and high areal density for CNTs.
Moreover, this is also the highest on-state current recorded so far for single CNT-based transistors.
According to Prof. Wei, "this is only the first step of our roadmap for wafer-scale applications of CNT tangles. We will synthesize more and larger tangles directly on wafers so that the separation can be performed on a larger scale. Also, these tangles can be post-densified to improve their density further. Then, the ones with the same color can be enriched on the designated substrate and high-performance devices can be fabricated on them."
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Septentrio Expands UAV Ecosystem for Reliable GNSS Positioning
04/22/2024 | SeptentrioSeptentrio, a leader in high-precision GNSS* positioning solutions, is closely working with several major drone solutions providers including 3DR, Holybro, ARK Electronics and Systork, which is resulting in various new products that allow easier prototyping or integration of the mosaic™ GNSS receiver into UAVs.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
Revolutionizing Sustainable Energy: Georgia Solar Companies Partner with Georgia Power to Unveil New Parking Deck Solar Array
04/19/2024 | BUSINESS WIREThree Georgia-based solar companies have joined together to design, build and construct an innovative solar array atop the parking deck at Georgia Power’s headquarters in Atlanta, Georgia.