Squeezing Light to Cool Microscopic Drum Below Quantum Limit
January 12, 2017 | NISTEstimated reading time: 3 minutes
Physicists at the National Institute of Standards and Technology (NIST) have cooled a mechanical object to a temperature lower than previously thought possible, below the so-called “quantum limit.”
The new NIST theory and experiments, described in the Jan. 12, 2017, issue of Nature (link is external), showed that a microscopic mechanical drum—a vibrating aluminum membrane—could be cooled to less than one-fifth of a single quantum, or packet of energy, lower than ordinarily predicted by quantum physics. The new technique theoretically could be used to cool objects to absolute zero, the temperature at which matter is devoid of nearly all energy and motion, NIST scientists said.
“The colder you can get the drum, the better it is for any application,” said NIST physicist John Teufel, who led the experiment. “Sensors would become more sensitive. You can store information longer. If you were using it in a quantum computer, then you would compute without distortion, and you would actually get the answer you want.”
“The results were a complete surprise to experts in the field,” Teufel’s group leader and co-author José Aumentado said. “It’s a very elegant experiment that will certainly have a lot of impact.”
The drum, 20 micrometers in diameter and 100 nanometers thick, is embedded in a superconducting circuit designed so that the drum motion influences the microwaves bouncing inside a hollow enclosure known as an electromagnetic cavity. Microwaves are a form of electromagnetic radiation, so they are in effect a form of invisible light, with a longer wavelength and lower frequency than visible light.
The microwave light inside the cavity changes its frequency as needed to match the frequency at which the cavity naturally resonates, or vibrates. This is the cavity’s natural “tone,” analogous to the musical pitch that a water-filled glass will sound when its rim is rubbed with a finger or its side is struck with a spoon.
NIST scientists previously cooled the quantum drum to its lowest-energy “ground state,” or one-third of one quantum. They used a technique called sideband cooling, which involves applying a microwave tone to the circuit at a frequency below the cavity’s resonance. This tone drives electrical charge in the circuit to make the drum beat. The drumbeats generate light particles, or photons, which naturally match the higher resonance frequency of the cavity. These photons leak out of the cavity as it fills up. Each departing photon takes with it one mechanical unit of energy—one phonon—from the drum’s motion. This is the same idea as laser cooling of individual atoms, first demonstrated at NIST in 1978 and now widely used in applications such atomic clocks.
The latest NIST experiment adds a novel twist—the use of “squeezed light” to drive the drum circuit. Squeezing is a quantum mechanical concept in which noise, or unwanted fluctuations, is moved from a useful property of the light to another aspect that doesn’t affect the experiment. These quantum fluctuations limit the lowest temperatures that can be reached with conventional cooling techniques. The NIST team used a special circuit to generate microwave photons that were purified or stripped of intensity fluctuations, which reduced inadvertent heating of the drum.
“Noise gives random kicks or heating to the thing you’re trying to cool,” Teufel said. “We are squeezing the light at a ‘magic’ level—in a very specific direction and amount—to make perfectly correlated photons with more stable intensity. These photons are both fragile and powerful.”
The NIST theory and experiments indicate that squeezed light removes the generally accepted cooling limit, Teufel said. This includes objects that are large or operate at low frequencies, which are the most difficult to cool.
The drum might be used in applications such as hybrid quantum computers combining both quantum and mechanical elements, Teufel said. A hot topic in physics research around the world, quantum computers could theoretically solve certain problems considered intractable today.
Suggested Items
Real Time with…. IPC APEX EXPO 2024: Innovation and Collaboration at EPTAC
05/06/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and EPTAC Vice President Leo Lambert discuss the partnership between EPTAC and Blackfox, their program alignment, and future expansion plans. Leo introduces Burak Gokmen as the new "leader of the pack." The focus then shifts to Nano Dimensions' 3D printed circuit boards, emphasizing the need for proper documentation and training.
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.