Tackling Challenge of Making Hydrogen and Preserving Lithium-Ion Batteries
February 2, 2017 | University at BuffaloEstimated reading time: 3 minutes
A PhD candidate at the University at Buffalo is pursuing ideas that could bring a hydrogen generating device to your car and prevent your lithium-ion battery from wearing out. And he is building a company to bring these breakthroughs to market.
Parham Rohani has launched NanoHydroChem LLC, which he hopes will become a holding company for the concepts he is focused on in the laboratory.
Rohani has developed a system to create nanosized particles of pure boron that can generate hydrogen when mixed with water at room temperature. The applications could be vast — from dramatically extending the range of drones, to powering back-up generators for remote cell towers, to tiny hydrogen generating machines for cars that run on it.
The beauty of Rohani’s method is that it reduces the weight of a hydrogen source. Current hydrogen storage methods involve heavy tanks to contain the gas. By avoiding the heavy tanks, the energy density of the hydrogen source — its watt-hour/weight — can be greatly increased.
“The energy density of hydrogen available from our system is two to three times that of lithium-ion batteries,” he said. That energy boost could make hydrogen a much more attractive energy source.
But there are challenges.
Process is not cheap
Rohani’s method begins with diborane gas (B2H6), which is very costly. The gas is blasted with a laser, which breaks the covalent bond between the two boron atoms. The gas is then quickly cooled to generate nanoparticles of pure boron (about 20 nanometers wide). The nanoparticles are then mixed with sodium hydride, pelletized and placed in a cartridge that can be discharged to mix with water, which releases hydrogen. That hydrogen can directly power a fuel cell to generate electricity.
The reaction takes place at room temperature, making it the first time pure boron has been captured under those conditions.
“This creation of small nanoparticles of boron is our invention,” Rohani said. “The nanosize has more surface area, and this allows the hydrolysis reaction to occur at room temperature.”
The byproduct of the hydrolysis is a form of boron oxide, which can be regenerated to make boron again. “It is complicated, but it can be done,” Rohani said.
The cost of the diborane makes the process cost prohibitive for most uses, so Rohani is working on that challenge. “What I’m trying to do is change the whole process to make it cheaper.”
Rohani’s PhD thesis involves his other business concept — extending the life of lithium-ion batteries with high-capacity silicon anodes. As the batteries are charged and then drained, the anode material expands and contracts, causing tiny cracks to form on the surface. Electrolytes fill in the cracks, and over time this degrades the battery.
Rohani is working on a way to keep the electrolytes away from the silicon.
“If you buy a lithium-ion battery, its capacity decreases over time. We need to find a cost effective process to extend the battery life,” he said. “I want to solve this problem and to make it as cheap as possible.”
Cost worthwhile for certain uses
Rohani’s PhD advisor is Mark T. Swihart, UB Distinguished Professor in the Department of Chemical and Biological Engineering, and executive director of UB’s New York State Center of Excellence in Materials Informatics. Swihart said there may be applications where the extra cost of the hydrogen-making process is worthwhile, like powering drones that inspect power lines or pipelines.
“If the drone can go twice as far, it might work,” he said.
Additionally, the diborane used in the process is extremely pure, because it is made for the microelectronics industry. If a market could be established for less pure diborane, the price could drop, Swihart said.
Still, much engineering needs to be done on the system. Swihart said the water used to make hydrogen could be recycled to further reduce the weight.
Rohani’s other work on lithium-ion batteries involves encapsulating the silicon particles to keep the electrolyte interface that forms off the silicon while still allowing lithium ions out to generate electricity.
“People have tried all kinds of structures, but nothing has taken off yet,” Swihart said.
Success in that area could become extremely valuable given all the lithium-ion batteries used in cellphones and other electronics.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
KYZEN to Promote Pair of Stencil Cleaning Chemistries at SMTA Ciudad Jaurez Expo & Tech Forum
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Ciudad Juarez Expo & Tech Forum, scheduled to take place Thursday, May 9, 2024 at the Injectronic Convention Center in Ciudad Jaurez, Chihuahua, Mexico. During the event the KYZEN Clean Team will focus on understencil cleaning products KYZEN E5631J and CYBERSOLV C8882.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.