-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A Tough Coat for Silicon
March 22, 2017 | A*STAREstimated reading time: 2 minutes
A simple, green method that applies a protective coating to semiconductors could help to develop these materials for many applications, from batteries to biosensors.
Silicon forms an oxide layer on its surface when exposed to air or moisture, which can detract from its electronic properties. Adding a ‘skin’ of molecules to the silicon can provide a physical barrier that prevents oxidation, but forming these monolayers can be tricky, requiring an inert atmosphere and long processing times, or demand the use of potentially harmful organic solvents.
Sreenivasa Reddy Puniredd of the A*STAR Institute of Materials Research and Engineering and colleagues have now developed a new way to deliver the protective molecules using supercritical carbon dioxide (scCO2). Carbon dioxide is converted to scCO2 under high pressure, when it becomes a free-flowing liquid that is chemically inert, inexpensive, and more environmentally-friendly than traditional solvents.
The researchers used scCO2 to carry molecules called alkylthiols, which contain long carbon chains with a sulfur atom at one end. Sulfur forms a stable bond with silicon, while the water-repelling carbon chains make a tightly-packed skin on silicon’s surface.
To apply the coating they used alkylthiols containing between seven and 18 carbon atoms to coat silicon, germanium, and silicon nanowires. Each procedure took a few hours, and produced monolayers between 1.6 nanometers and 2.3 nanometers thick that resisted wear and repelled water. The greatest effect was seen for the longest alkylthiol chains.
The monolayers also protected the surface from oxygen for more than 50 days; those prepared using conventional solvents were typically stable for less than seven days. “The increase in stability was expected, but such long-term stability was a surprise,” says Puniredd.
Silicon nanowires are being tested for a range of biological applications, including biosensors and antibacterial surfaces. Although fragile and easily damaged by other monolayer formation methods, the silicon nanowires were undamaged by the scCO2 process, allowing the researchers to test how they interacted with human liver cells. Those protected by the 18-carbon alkylthiol significantly reduced cell growth on the nanowires, compared with unprotected nanowires or a flat silicon surface. This is probably because the cells’ proteins could not latch on to the monolayer’s long carbon chains.
“This scCO2 technology can be adopted for many kinds of inorganic surface modification,” says Puniredd. “The technology is not only scalable, but also enhances the quality and stability of the film. It can potentially replace billions of pounds of organic solvents used every year in thin-film fabrication and cleaning applications.”
Suggested Items
High Temperature Component Warpage as a Function of Moisture Sensitivity (MSL) Rating
05/29/2024 | Neil Hubble, AkrometrixMoisture sensitivity requirements for non-hermetic surface mount devices are defined in the joint IPC/JEDEC standard J-STD-020E, “Joint IPC/JEDEC Standard for Moisture/Reflow Sensitivity Classification for Non-hermetic Surface-Mount Devices,” last updated in December 2014. This standard allows customers and suppliers to place electronics devices into specific categories, defined into 8 different moisture sensitivity levels (MSL). Test method criteria are defined within this standard to define MSL levels for different packages. A subsection of MSLs are shown in Figure 1 below, showing the MSL 3 and 4 used in this study.
Raytheon-Kongsberg System is Proving Itself – In Demos and In Combat
05/16/2024 | Raytheon TechnologiesOn a rocky island off the coast of Norway, Michael Sadlowski watched as a surface-to-air missile launcher pointed up into a dark nighttime sky.
ispace EUROPE, CDS Sign Payload Service Agreement to Transport Precise Location Measurement Technology to the Moon
05/14/2024 | BUSINESS WIREispace EUROPE S.A., the Luxembourg-based subsidiary of ispace, inc., and Control Data Systems SRL (CDS) have signed a payload services agreement to transport precise location measurement equipment to the Moon, the two companies announced.
RTX Introduces the Collins Airport Surface Awareness System
05/10/2024 | RTXCollins Aerospace, an RTX business, introduces Collins’ Airport Surface Awareness System for real-time tracking, monitoring, and recording of both aircraft and ground support equipment at airports.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.