Use of Machine Learning to Design Optimal Nanostructures to Control Heat Current in Materials
June 28, 2017 | National Institute for Materials ScienceEstimated reading time: 2 minutes
A research team consisting of associate professor Junichiro Shiomi (also affiliated with the Center for Materials Research by Information Integration [CMI2] at NIMS), postdoctoral fellow Shenghong Ju, assistant professor Takuma Shiga, Ph.D. student Lei Feng—all from the University of Tokyo School of Engineering—University of Tokyo Graduate School of Frontier Sciences professor Koji Tsuda (also affiliated with the CMI2 at NIMS) and NIMS researcher Zhufeng Hou developed a calculation method for identifying optimal nanostructures to either maximize or minimize the thermal resistance of target materials (Phys. Rev. X, "Designing Nanostructures for Phonon Transport via Bayesian Optimization").
This method reduced the amount of calculation by more than 90% compared to conventional methods. The team also succeeded in designing novel, non-intuitive nanostructures.
Schematics showing a calculation method for identifying nanostructures that either maximize or minimize thermal resistance. (Image: NIMS)
In thermal management applications, technologies to control thermal transport in materials by forming nanoscale structures in them has been drawing attention in recent years. Taking advantage of the ballistic behavior of phonons at the nanoscale, thermal transport is becoming more controllable (e.g., thermal resistance can be increased dramatically by creating interfaces at nanoscale intervals as in superlattice structures and nanocrystalline materials).
While advancements in computational science have greatly contributed to these improvements, no study of optimal structural design had been conducted.
The research team recently developed a new method of optimizing nanostructures by combining a method of calculating thermal transport in nanostructures and a Bayesian optimization method.
This newly developed method applies to two-dimensional crystalline materials and identifies optimal structures out of numerous candidate structures by assigning a descriptor to each atom composing a nanostructure.
Application of this method to materials consisting of silicon and germanium demonstrated that it can identify optimal structures by calculating only a small percentage of the total candidate structures. Contrary to expectations, it was found that among the selected structures, optimal structures that maximize thermal resistance have an aperiodic layered structure rather than a periodic superlattice structure.
Moreover, it was found that the mechanism of the optimal structures can be explained by the particle and wave properties of phonons.
This study demonstrated that materials informatics – a fusion between materials science and machine learning – is useful in the development of thermally functional nanomaterials. Given that the technology to create various new nanostructures is advancing, techniques to identify structures that maximize/minimize the thermal resistance of target materials, along with materials design, may contribute to improving the heat dissipation of optical and electronic devices, heat shielding protection for devices and the efficiency of thermoelectric conversion elements.
Suggested Items
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.