New T-Wave Detector Uses Waves of the Electronic Sea in Graphene
December 24, 2018 | MIPTEstimated reading time: 2 minutes
A team of researchers from Russia, Great Britain, Japan, and Italy has created a graphene-based terahertz detector.
Any system for wireless data transfer relies on electromagnetic wave sources and detectors, but they are not available for every kind of waves. The existing sources of terahertz radiation, which occupies a middle ground between microwaves and infrared light, consume too much power or require intense cooling. Yet T-waves could potentially enable faster Wi-Fi, new methods of medical diagnostics, and studies of space objects using radio telescopes.
The reason for the inefficiency of the existing terahertz detectors is the mismatch between the size of the detecting element, the transistor — about one-millionth of a meter — and the typical wavelength of terahertz radiation, which is some 100 times greater. This results in the wave slipping past the detector without any interaction.
In 1996, it was proposed that to address this issue, the energy of an incident wave could be compressed into a volume comparable to the size of the detector. For this purpose, the detector material should support “compact waves” of a special kind, called plasmons. They represent the collective motion of conduction electrons and the associated electromagnetic field, not unlike the surface sea waves moving together with the wind as a storm sets in. In theory, the efficiency of such a detector is further increased under wave resonance.
Implementing such a detector proved harder than anticipated. In most semiconductor materials, plasmons undergo rapid damping — that is, they die down — due to electron collisions with impurities. Graphene was seen as a promising way out, but until recently, it was not clean enough, too.
Figure 1. Detector layout. The transistor channel, made of bilayer graphene (BLG), is sandwiched between two crystals of hexagonal boron nitride (hBN). This structure is placed on an oxidized silicon substrate (shown in gray). The two sleeves of a terahertz antenna are connected between the source and the top gate — that is, the left and top electrodes shown in gold. Signal voltage is read between the source and the drain terminals — the right and left electrodes. Credit: @tsarcyanide/MIPT Press Office
The authors of the research presented a solution for the long-standing problem of resonant T-wave detection. They created a photodetector — shown in figure 1 — made of bilayer graphene encapsulated between crystals of boron nitride and coupled to a terahertz antenna. In this sandwich structure, impurities are expelled to the exterior of the graphene flake, enabling plasmons to propagate freely. The graphene sheet confined by metal leads forms a plasmon resonator, and the bilayer structure of graphene enables wave velocity tuning in a wide range.
In fact, the team has developed a compact terahertz spectrometer, several microns in size, with the resonant frequency controlled via voltage tuning. The physicists have also shown the potential of their detector for fundamental research: By measuring the current in the detector at various frequencies and electron densities, plasmon properties can be revealed.
“Our device doubles up as a sensitive detector and a spectrometer operating in the terahertz range, and it’s also a tool for studying plasmons in two-dimensional materials. All of these things existed before, but they took up a whole optical table. We packed the same functionality into a dozen micrometers,” said the paper co-author Dmitry Svintsov, who heads the Laboratory of 2D Materials for Optoelectronics at the Moscow Institute of Physics.
Suggested Items
Sanmina's Second Quarter Fiscal 2024 Financial Results
05/02/2024 | Sanmina Corp.Sanmina Corporation, a leading integrated manufacturing solutions company, today reported financial results for the fiscal second quarter ended March 30, 2024 and outlook for its fiscal third quarter ending June 29, 2024.
Real Time with... IPC APEX EXPO 2024: Factory Insights: A Customizable Data Collection Solution
05/01/2024 | Real Time with...IPCEditor Nolan Johnson and Julie Cliche-Dubois, product manager for Cogiscan, focus on Factory Insights, a new product that emphasizes customization. With years of experience in data collection from various machines and factories, the Factory Insights product offers dashboards and KPI customization, striking a balance between out-of-the-box solutions and customization, ultimately bringing contextualization to machine data.
The Connection Between Wire Harness and Box Build
04/17/2024 | Nolan Johnson, I-Connect007Christina Rutherford is a technical lead and expert in materials engineering at Honeywell, where her specialty is the design, specification, and manufacture of cables and wire harnesses. Rutherford also sits on the committee for IPC/WHMA-A-620. In this conversation, we explore the changing dynamics in wire harnesses and how they relate to box build. Christina’s standards work allows her to draw insightful parallels between wire harness and box build.
Global Sourcing Spotlight: Don’t Be Afraid of Global Sourcing
04/03/2024 | Bob Duke -- Column: Global Sourcing SpotlightOn paper, it doesn’t seem like a great time for global sourcing. With several world conflicts, it may seem impossible to think that something like global sourcing and commercial trade between countries could begin to alleviate this tension between warring countries. But hey, I’ve always been a glass-half-full guy, so humor me. While trade between countries can indeed foster cooperation and contribute to peace in several ways, it's essential to recognize that it's not a panacea for all global issues. However, here are some ways in which trade can contribute to peace and global stability.
Airbus Continues to Collaborate with NASA to Monitor Climate Change from Space
03/22/2024 | AirbusAirbus has been awarded a contract to design and build the GRACE-C twin spacecraft by NASA’s Jet Propulsion Laboratory JPL (Pasadena, California). This new mission of NASA and the German Space Agency at the German Aerospace Center (DLR) will strengthen the more than 20 year long partnership between the USA and Germany to ensure uninterrupted measurement of the Earth's gravity field, which started in 2002 with GRACE and continues with GRACE Follow-On, launched in 2018.