-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
Beyond Design: Predicting and Measuring Impedance
To control the impedance of high-speed signal interconnects, one first needs to predict the impedance of a specific multilayer stackup configuration. A precision field solver is arguably the most accurate way to calculate the single-ended, edge-coupled, and broadside-coupled differential impedance. Once the board is fabricated, the transmission lines need to be physically measured to determine the actual impedance to qualify the board.
The most common method for measuring PCB trace impedance is to use a time-domain reflectometer (TDR). This measures the impedance in the time domain. However, a far more accurate method is to use a vector network analyzer (VNA), which operates in the frequency domain. The VNA sweeps through a range of frequencies determining the impedance and signal losses at particular frequencies.
However, VNAs are expensive, delicate instruments and not as robust as a TDR, which allows unskilled personnel to operate them in a factory environment yielding repeatable results. Hence, from a cost and practicality perspective, the TDR is the de facto standard impedance measurement instrument in the PCB fabrication industry.
A TDR applies a very fast pulse (less than 100 ps) to an impedance test coupon via a controlled impedance cable and matching impedance probe.
Whenever there is a change in impedance, part of the signal energy is reflected back to the TDR and is measured by the instrument. The magnitude of the reflected signal is related to the value of the discontinuity. Changes in the cross-sectional area of the trace, distance to the plane(s), and return path or proximity to other pads and traces will also cause a change in the impedance and cause a reflection. From this data, it is possible to graph the impedance and its variation over distance or time.
To read the rest of this column, which appeared in the April 2020 issue of Design007 Magazine, click here.
More Columns from Beyond Design
Beyond Design: The Art of Presenting PCB Design CoursesBeyond Design: Embedded Capacitance Material
Beyond Design: Return Path Optimization
Beyond Design: Just a Matter of Time
Beyond Design: Design Success with IPC Standards
Beyond Design: Integrating AI Into PCB Design Flow
Beyond Design: Standing Waves in Multilayer PCB Plane Cavities
Beyond Design: Balancing Trade-offs for Optimal PCB Design