Total Revenue of Global Top 10 IC Design Houses for 3Q22 Showed QoQ Drop of 5.3%
December 16, 2022 | TrendForceEstimated reading time: 5 minutes
Global market intelligence firm TrendForce reports that the revenue generation momentum of the global IC design industry slowed down in 3Q22. The main factors behind this development were the Russia-Ukraine military conflict, the recent COVID-19 lockdowns in China, the ongoing inflation, and clients undergoing inventory corrections. The total revenue of the global top 10 IC design houses came to US$37.38 billion for 3Q22, showing a QoQ decline of 5.3%. Qualcomm remained first place in the ranking of the global top 10 IC design houses by revenue for 3Q22. Broadcom returned to second place by overtaking NVIDIA and AMD, who slipped to third and fourth respectively due to weakening demand for PCs and cryptocurrency mining machines.
US-Based IC Design Houses Were Able to Offset Revenue Decline for Certain Products Because Their Product Mixes Cover Wide Range of Applications
Regarding US-based IC design houses that were in the top 10 group for 3Q22, Qualcomm recorded a QoQ increase for the sales of smartphone SoCs and 5G modem chips. It also made gains in the automotive electronics market by expanding its collaborations with partners in the automotive industry. As a result, Qualcomm’s 3Q22 revenue figures for mobile and automotive offerings reflected QoQ increases of 6.8% and 22.0% respectively. The revenue growth of these two major product categories offset the marginal decline in the revenue for RF front-end chips. Qualcomm’s IC design revenue as a whole climbed up by 5.6% QoQ to US$9.90 billion for 3Q22. The company sat firmly at the top of the ranking.
Broadcom had an impressive result for the sales of its semiconductor solutions in 3Q22. Thanks to the stable demand from the high-end segment of the market for networking devices, its revenue went up by 6.8% QoQ to US$6.94 billion. Broadcom’s acquisition of VMware is currently being reviewed by the relevant regulatory authorities. Once this deal is completed, Broadcom will have a chance to contend for the No. 1 spot in the revenue ranking.
NVIDIA managed to raise sales for chips deployed in data centers and automotive electronics during 3Q22. However, these gains were not enough to compensate for the freeze in the demand for graphics cards equipped in cryptocurrency mining machines. NVIDIA saw a QoQ drop of 32.6% in the revenue from solutions for gaming and a QoQ drop of 44.5% in the revenue from solutions for professional visualization. Taken altogether, NVIDIA posted a QoQ decline of 14.0% to US$6.09 billion.
For 3Q22, AMD saw a QoQ increase of 8.3% in the revenue from businesses related to data centers. AMD also saw for the first time that the revenue related to data center solutions exceeded the revenue related client solutions (i.e., CPUs for desktops and laptops as well as other SoCs). Nevertheless, weakening demand for consumer electronics had a substantial impact on the revenue from client solutions, and this dragged down AMD’s overall performance. AMD posted a QoQ decline of 15.0% to US$5.57 billion.
Marvell was able to raise its 3Q22 revenue by 2.5% QoQ to US$1.53 billion because demand is relatively steady for its networking solutions (e.g., chips for data centers, enterprise network infrastructure, and automotive electronics). Turning to Cirrus Logic, it returned to the top 10 group in 3Q22 thanks to its lead in the market for low-power and high-precision mixed-signal processing solutions. Even though sales of Android smartphones were weak during that quarter, there was also an increase in the market penetration of certain audio chips for high-end Android smartphones. Moreover, Cirrus Logic benefited from an influx of Apple’s orders related to the new iPhone 14 series. Hence, its revenue rose by 37.3% QoQ to US$541 million in spite of the challenging market environment.
Asian Design Houses in Top 10 Group All Posted QoQ Drop in Revenue as They Were More Affected by Demand Slump in Consumer Electronics Market
Among Taiwan-based IC design houses in the top 10 group for 3Q22, MediaTek posted a QoQ drop of 11.6% to US$4.68 billion. Due to Chinese smartphone brands’ weak sales performances and clients undergoing inventory corrections, MediaTek saw a QoQ decline in the revenues from mobile solutions, smart edge platforms, and power ICs. Inventory reduction will remain MediaTek’s top priority going forward. Turning to Realtek, sales of its solutions for networking and automotive applications remained stable in 3Q22. However, chips for PCs account for about 32% of its product mix, so the considerable shrinking of the demand for consumer electronics during the same period affected its overall performance. Realtek’s 3Q22 revenue came to US$979 million, showing a QoQ decline of 5.5%. As for Novatek, SoCs and display driver ICs as its two major product categories suffered a decline in both price and shipments. As a result, its 3Q22 revenue fell by 39.9% QoQ to US$643 million. Novatek experienced the steepest revenue drop among the top 10.
Will Semiconductor, which is based in Mainland China, posted a QoQ decline of 25.8% to US$513 million for 3Q22. Since the company mainly offers chips equipped in smartphones (e.g., CMOS image sensors, TDDI solutions, and analog ICs), its performance was affected by poor smartphone sales and COVID-19 lockdowns in China.
TrendForce points out that IC design houses have different product mix strategies. Therefore, demand has been steady for some them whose product mixes are mainly composed of solutions for data centers, networking hardware, IoT devices, automotive electronics, etc. On the other hand, demand has weakened significantly for consumer electronics, display panels, and cryptocurrency mining machines, so the revenues from the related solutions have shrunk as well. Hence, the revenue results of the top 10 IC design houses for 3Q22 show gains for certain product categories coexisting with losses for others. Still, the semiconductor market as a whole has recently been in slump, so more than half of the top 10 posted a revenue decline for 3Q22.
Looking at the period from 4Q22 to 1Q23, TrendForce believes that because of the ongoing inflation, promotional activities related to the year-end holiday season will not lead to a significant rise in the overall demand for consumer electronics. Also, more time is needed to adjust inventory level for the demand side of the semiconductor market. Therefore, these two quarters are going to be very challenging for IC design houses, and the chance is high for them to post negative QoQ revenue results. However, IC design houses could also use this downturn period to lower their inventory levels while raising their cash levels. They could also introduce their products to other application segments, especially data centers and automotive electronics. In doing so, they would be better prepared for the future recovery of the whole semiconductor industry.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.