GUC Delivers its First TSMC N3 Chip, AI-Optimized N5 Design Using Cadence Digital Solutions
January 20, 2023 | Cadence Design Systems, Inc.Estimated reading time: 1 minute
Cadence Design Systems, Inc. announced that Global Unichip Corp. (GUC) successfully delivered an advanced HPC design and a CPU design using Cadence® digital solutions. The HPC design was created using the Cadence Innovus™ Implementation System on TSMC’s advanced N3 process and featured a 3.5 million instance count that reached clock speeds of up to 3.16GHz. The CPU design was created using the AI-enabled Cadence Cerebrus™ Intelligent Chip Explorer and the digital full flow on the TSMC N5 process technology, delivering 8% reduced power and a 9% area improvement while significantly improving engineering productivity.
The Innovus Implementation System’s highly accurate GigaPlace engine provided GUC with support for TSMC FinFlex™ cell row placement and consideration for pin access throughout the flow for N3 design rule checking (DRC) closure. The state-of-the-art GigaOpt engine delivered improved optimization by enabling the most optimal configuration from the TSMC N3 library while balancing different cell row utilization. The Innovus Implementation System also includes a massively parallel architecture and incorporates the well-established NanoRoute engine, which enabled GUC to address signal integrity early in the design flow while improving post-route correlation.
Cadence Cerebrus, coupled with the Cadence digital flow, was instrumental in providing GUC with power, performance and area (PPA) benefits as well as the ability to perform synthesis through implementation and signoff on their 5nm CPU design, optimizing engineering team productivity. Unique to Cadence Cerebrus is its reinforcement learning engine that autonomously optimized GUC’s design flow, allowing the team to exceed human engineering potential and accelerate time to market.
“GUC is a market leader providing advanced chip solutions for AI, HPC, 5G, industrial and other emerging applications,” said Dr. Louis Lin, senior vice president of Design Services at GUC. “Given our commitment to deliver the most competitive designs to our customers, it is important for us to invest in leading-edge technologies. The Cadence Cerebrus Intelligent Chip Explorer, in conjunction with the broader digital flow, was the natural choice to help us achieve faster design turnaround via AI technology while also improving PPA. The Innovus Implementation System was instrumental in helping us deliver our first N3 chip, enabling our team to accelerate the creation of our high-performance, low-power HPC design.”
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.