UHDI Fundamentals: Talking UHDI with John Johnson, Part 2
December 26, 2023 | Steve Williams, The Right Approach Consulting LLCEstimated reading time: 2 minutes
Editor’s note: This is the second of a three-part interview. To read Part 1, click here.
American Standard Circuits is an early adopter of Averatek’s A-SAP™ process for its ultra-high density interconnect (UHDI) products. I had the opportunity to sit down with industry veteran John Johnson to discuss this. John previously worked at Averatek and is now vice president of business development at American Standard Circuits where he oversees quality. In the spirit of full disclosure, we will be discussing and sharing photos, slides, and materials with permission from both ASC and Averatek.
Steve Williams: John, American Standard Circuits is a big RF manufacturer. Is there a big application for UHDI in that niche?
John Johnson: Yes, absolutely. From a signal integrity side and getting that straight sidewall, it benefits a lot. But this technology works very well to produce very, very low surface profiles, and that’s an additional benefit. When you look at just building boards with controlled impedance, you can get to a much tighter tolerance. We talk in the industry of typically ±10%, but we can do 5%, so this can get you down to a much tighter tolerance the first time out of the box because you're building right to the design. Your trace will be right there, and since you're plating up a trench—that little trench gets filled up—and that's exactly at the width the designer intended, so it's a lot easier to hit the impedance requirements. Also, this technology has a lot of potential in the medical industry. You can make biocompatible circuit boards because A-SAP does not have any copper or nickel in the construction—which are toxic to the body. You can do traces that are all noble metals like palladium and gold, and that's a big improvement.
Williams: Are you doing anything biocompatible? Johnson: We are. We've built a couple of programs here with more to come. Williams: One of the foundations of the process is liquid metal ink (LMI™). Tell me about that.
Johnson: LMI is a patented Averatek chemistry for putting down a very, very thin coating of palladium on the surface. It’s very dense—basically several levels deep of atoms touching atoms. It’s just a few nanometers thick. That density really helps in getting plating down into all the small crevices and small vias that need to be plated. The liquid metal ink is a non-aqueous base, so that wets very well in all the little nooks and crannies that you'll see in drilled holes. You can metallize these holes much easier than standard plating chemistry...
Continue reading this interview in the December 2023 issue of Design007 Magazine.
Suggested Items
Seeking Employment: Palash Pranav Vyas
05/03/2024 | Barry Matties, I-Connect007Despite skilled worker shortages across the industry, there are many educated and qualified individuals ready to contribute to electronics manufacturing. Here we profile Palash Pranav Vyas, a Ph.D. candidate at Auburn University whose work in drop shock reliability won him Best Student Poster at IPC APEX EXPO 2024.
Mycronic Releases Interim Report January–March 2024
04/18/2024 | MycronicNet sales increased 39 percent to SEK 1,692 (1,219) million. Based on constant exchange rates, net sales increased 42 percent.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.
IPC APEX EXPO 2024: There’s an App for That
04/03/2024 | Kim DiCianni, IPCWith so many things to do at a large trade show and conference like IPC APEX EXPO, you cannot possibly take every class, attend every talk, or see every vendor on your list. But you can plan your days and maximize your time with the IPC APEX EXPO mobile app. The app allows you to easily view the show’s daily agenda, keynote speakers, the conference and professional development schedules, and, of course, flag and make notes on exhibitors.