Translucent Li-ion Battery Charges Itself by Using Sunlight
September 3, 2015 | NikkeiEstimated reading time: 1 minute
A Japanese research group prototyped a translucent lithium-ion (Li-ion) rechargeable battery that can charge itself by using sunlight.
With the battery, the group aims to realize a "smart window," which is an almost transparent window that functions both as a large-area rechargeable battery and as a photovoltaic cell (when the window receives sunlight, it is pigmented, lowering light transmittance).
The group is led by Mitsunobu Sato, president of Kogakuin University and professor at the Department of Applied Physics, School of Advanced Engineering of the university. The battery was exhibited at Innovation Japan 2015, a trade show that took place from Aug. 27 and 28, 2015, in Tokyo.
Translucent Li-ion battery announced in 2013
The group developed a translucent Li-ion rechargeable battery and announced it in a thesis in 2013.
The main component of the electrolyte used for the positive electrode of the battery is Li3Fe2(PO4)3 (LFP). And those of the electrolyte used for the negative electrode are Li4Ti5O12 (LTO) and LiPF6 (lithium hexafluorophosphate). Those material are commonly used for Li-ion rechargeable batteries. However, oxides are basically transparent, and the thicknesses of the positive and negative electrodes are only 80nm and 90nm, respectively, realizing a high light transmittance.
The light transmittance for green light (wavelength: about 550nm) is about 60% after discharging. It lowers to about 30% after charging because the density of lithium changes at the electrodes and the electronic state (valence) of the material changes.
The output voltage of the battery is about 3.6V. And the research group confirmed 20 charge-discharge cycles.
Latest battery
This time, the group exhibited a device that has not been announced in a thesis. It was made by making some changes to the materials of the translucent Li-ion battery announced in 2013 so that electrons excited by light coming to the negative electrode can be used to charge the battery.
At the trade show, the group showed the results of an experiment in which optical charge and discharge are repeated five times by applying near-ultraviolet light with an output of 10mW/cm2, which is about 1/10 that of sunlight.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
IPC Publishes Comprehensive Strategy to Address Electronics Industry’s Global Workforce Challenge
04/10/2024 | IPCOne of the most difficult and urgent challenges facing the electronics industry is a chronic shortage of adequately skilled workers. Today, IPC unveiled an expansion of its strategy to address the workforce challenges of the U.S. electronics manufacturing industry and called on its more than 3,000 member companies to join in the effort.
UHDI Fundamentals: ASC Sponsors Ultra High Density Interconnect Symposium
03/21/2024 | Anaya Vardya, American Standard CircuitsAmerican Standard Circuits (ASC) is a major sponsor of an upcoming symposium on one of the most talked about new technologies that has come along in quite a while: ultra high density interconnect (UHDI).
onsemi Aligns Business Groups to Expand Product Portfolio and Accelerate Growth
03/13/2024 | onsemionsemi announced the formation of the Analog and Mixed-Signal Group (AMG) which will be led by newly appointed group president, Sudhir Gopalswamy.
Indium Corporation Experts to Present at SEMI THERM
03/07/2024 | Indium CorporationIndium Corporation Global Account Manager and Senior Thermal Technologist Tim Jensen and Product Development Specialist for Thermal Interface Materials Miloš Lazić will present on thermal interface material (TIM) technology at SEMI-THERM, taking place March 25–28 in San Jose, California, U.S.