Squeezing Mechanical Motion
October 2, 2015 | AIP.orgEstimated reading time: 1 minute
Heisenberg's uncertainty principle takes the form of a trade-off: It's always possible, at least in theory, to reduce the quantum uncertainty in a parameter of interest (a particle's position, say) at the expense of increasing the uncertainty of something else (its momentum). In optics, the trade-off gives rise to so-called squeezed states of light, which can be constructed, for example, with lower uncertainty in their amplitude and higher uncertainty in their phase. The ability to produce squeezed light has enabled optical measurements to be made with greater precision than would otherwise be possible. Now Caltech's Keith Schwab and collaborators have achieved the long-standing goal of similarly squeezing the motion of a micron-scale mechanical resonator.
In their device, shown here, the center-square capacitor and the spiral-wire inductor form an LC circuit with a resonant frequency of 6.2 GHz. Furthermore, the top plate of the capacitor is free to move, with a vibrational frequency of 3.6 MHz. A major obstacle to teasing out such a system's quantum character is that even at a chilly 10 mK, thermal fluctuations in the mechanical motion overwhelm quantum fluctuations by two orders of magnitude. Prior research has shown that driving the circuit at the difference between the two resonant frequencies can sap the mechanical resonator's energy and cool the resonator into the quantum regime. Schwab and company went a step further: They drove the circuit at the sum and difference frequencies simultaneously, thereby cooling and squeezing the motion at the same time. By analyzing the circuit's output frequency spectrum, they deduced that the positional uncertainty over part of the mechanical resonator's cycle was squeezed to 80% of the quantum zero-point level.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Trackwise Awarded Prestigious King’s Award for Enterprise for Innovation
04/24/2024 | TrackwiseTrackwise Designs plc, the innovative manufacturer of specialist products using printed circuit technology, is delighted to be recognised with a prestigious King’s Award for Enterprise. Announced, Friday 21 April, Trackwise has been recognised for its excellence in Innovation for its length-unlimited, multilayer flexible printed circuits.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.