Manufacturing Flexibility with Free-form Electronic Circuits
November 19, 2015 | CORDISEstimated reading time: 2 minutes
"TERASEL was inspired by the need for smart, randomly shaped electronic and sensor circuits for a number of end uses including lighting, car interiors, user interfaces and consumer electronics," says project coordinator Jan Vanfleteren from IMEC, Belgium. 'Our key objective has been to develop cost effective technologies for the production of these circuits, or 2.5D circuits as we call them.’
Free-form 2.5D circuits are of increasing interest to manufacturers looking to integrate seamless, low cost and energy efficient electronic applications. These circuits are formed from a conventional flat substrate, which is then deformed to the desired 2.5D shape using conventional thermoforming. Key advantages include their easy integration into a wide variety of electronic components, their support for power applications with high currents and voltages and their use of standard circuit board industry equipment.
For the automotive sector, 2.5D circuits will enable the delivery of modular car interior components with all functionalities integrated, reducing assembly complexity, cost and time to market. TERASEL will also help consumer electronics manufacturers to reduce the size of their products further by embedding circuit boards directly in the outer shell of products, and for lighting, the project will offer architects and interior designers the flexibility to place LEDs where they are needed the most.
The project has established industrial production chains in order to produce these circuits in sufficient quantity and quality. ‘In this way, end users will have direct access to production lines to develop actual products after the project is completed,’ says Vanfleteren. ‘Our electronics manufacturing and polymer processing project partners will also have the chance to expand their technology portfolios and obtain exclusive rights in the manufacturing of these products.’
TERASEL’s lighting applications were on display at the Ghent Light Festival in January 2015. ‘This showed that it was possible to produce, even at lab scale, fairly large numbers – about 50 – of 2.5D circuits for curved LED light sources in a fairly short timeframe,’ says Vanfleteren. ‘The success of this event gave us confidence in the potential of scaling up the technology to produce large volumes. We are confident that within the coming year we will be able to start small-scale production for end users.’
Potential clients from different application domains have also expressed interest in the TERASEL project’s results to date. ‘Taking their specifications into account, further work is required to develop particular variants of the technology,’ says Vanfleteren. ‘But these requests from potential users from a variety of application domains nonetheless suggest that technology transfer to additional industrial manufacturing partners outside TERASEL could be a possibility.’
The TERASEL project builds upon stretchable electronics technology developed in previous European projects such as STELLA (Stretchable Electronics for Large Area Applications) and Place-It (Platform for Large Area Conformable Electronics by inTegration). The project is due for completion in September 2016.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.