LiU Researchers Create Electronic Plants
November 23, 2015 | Linköping UniversityEstimated reading time: 4 minutes
With the help of the channels that distribute water and nutrients in plants, the research group at the Laboratory for Organic Electronics, under the leadership of Professor Magnus Berggren, have built the key components of electronic circuits. In an article in Science Advances, they show how roses can produce both analog and digital electronic circuits, which over the long term could be used, for example, to regulate the plant’s physiology.
Traditional electronics send and process electronic signals, while plants transport and handle ions and growth hormones. In organic electronics, based on semi-conductive polymers, both ions and electrons can serve as signal carriers. With the help of organic electronics it therefore becomes possible to combine electric signals with the plant’s own, as if translating the plant’s signals into traditional electronics. With inexpensive organic electronics integrated into plants, a long range of possibilities opens up – such as utilizing energy from photosynthesis in a fuel cell, or reading and regulating the growth and other inner functions of plants.
Using semi-conductive polymers, both analog and digital electronic circuits can be created inside living flowers, bushes and trees, as researchers at Linköping University Laboratory for Organic Electronics have shown.
“Previously, we had no good tools for measuring the concentration of various molecules in living plants. Now we’ll be able to influence the concentration of the various substances in the plant that regulate growth and development. Here, I see great possibilities for learning more,” says Ove Nilsson, professor of plant reproduction biology at the Umeå Plant Science Center and co-author of the article.
Since the beginning of the 1990s, Magnus Berggren – professor of Organic Electronics at Linköping University’s Norrköping campus – has been researching printed electronics on paper. Now and then the idea of putting electronics into the tree itself cropped up, but research funders were indifferent. Thanks to independent research money from the Knut and Alice Wallenberg Foundation at the end of 2012, Professor Berggren could hire three researchers with new doctorates: Roger Gabrielsson, Eleni Stavrinidou and Eliot Gomez. The task was to investigate – with the help of the more senior researchers at Linköping University and the Umeå Plant Science Center – whether it was possible to introduce and even produce electronics in plants.
The answer, in other words, was yes. In just about two years, the research group succeeded in getting plants to produce both analog and digital circuits.
Page 1 of 2
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.