Shows Promise for Next-gen Semiconductor Production
December 4, 2015 | NISTEstimated reading time: 4 minutes
National Institute of Standards and Technology (NIST) researchers are seeing the light, but in an altogether different way. And how they are doing it just might be the semiconductor industry's ticket for extending its use of optical microscopes to measure computer chip features that are approaching 10 nanometers, tiny fractions of the wavelength of light.
Using a novel microscope that combines standard through-the-lens viewing with a technique called scatterfield imaging, the NIST team accurately measured patterned features on a silicon wafer that were 30 times smaller than the wavelength of light (450 nanometers) used to examine them. They report* that measurements of the etched lines--as thin as 16 nanometers wide--on the SEMATECH-fabricated wafer were accurate to one nanometer. With the technique, they spotted variations in feature dimensions amounting to differences of a few atoms.
Measurements were confirmed by those made with an atomic force microscope, which achieves sub-nanometer resolution, but is considered too slow for online quality-control measurements. Combined with earlier results, the NIST researchers write, the new proof-of-concept study* suggests that the innovative optical approach could be a "realistic solution to a very challenging problem" facing chip makers and others aiming to harness advances in nanotechnology. All need the means for "nondestructive measurement of nanometer-scale structures with sub-nanometer sensitivity while still having high throughput.
"Light-based, or optical, microscopes can't "see" features smaller than the wavelength of light, at least not in the crisp detail necessary for making accurate measurements. However, light does scatter when it strikes so-called subwavelength features and patterned arrangements of such features. "Historically, we would ignore this scattered light because it did not yield sufficient resolution," explains Richard Silver, the physicist who initiated NIST's scatterfield imaging effort. "Now we know it contains helpful information that provides signatures telling us something about where the light came from."
With scatterfield imaging, Silver and colleagues methodically illuminate a sample with polarized light from different angles. From this collection of scattered light--nothing more than a sea of wiggly lines to the untrained eye--the NIST team can extract characteristics of the bounced lightwaves that, together, reveal the geometry of features on the specimen.
Light-scattering data are gathered in slices, which together image the volume of scattered light above and into the sample. These slices are analyzed and reconstructed to create a three-dimensional representation. The process is akin to a CT scan, except that the slices are collections of interfering waves, not cross-sectional pictures.
"It's the ensemble of data that tells us what we're after," says project leader Bryan Barnes." We may not be able see the lines on the wafer, but we can tell you what you need to know about them--their size, their shape, their spacing."
Page 1 of 2
Suggested Items
Real Time with… IPC APEX EXPO 2024: Automation in North American PCB Shops
05/17/2024 | Real Time with...IPC APEX EXPOBenmayor Group has entered the North American market's automation landscape with their Technosystem division. In this interview, Eduardo Benmayor highlights this underinvestment and current efforts to catch up and address challenges related to strategic planning. Eduardo shares Technosystem's automation journey, from simple equipment to robotic arms, stressing the importance of machine communication and data analysis. He also offers advice on implementing automation in older facilities.
Using AI to Redefine Productivity
05/15/2024 | Nolan Johnson, SMT007 MagazinePlato Systems, a machine perception company spun out of Stanford University, employs AI and video data to analyze and optimize the human component in manufacturing. Initially focused on semiconductors, Plato Systems has expanded into EMS manufacturing. Co-founder and CEO Amin Arbabian, along with product advisor Anders Holden and head of growth Luis Vidal, discuss their approach to changeover optimization and its impact on productivity in the industry. They’ve also included customer Raj Vora in the conversation.
Real Time with… IPC APEX EXPO 2024: Manufacturing Intelligence from the Factory Floor
05/15/2024 | Real Time with...IPC APEX EXPONolan Johnson and Ranjan Chatterjee, Vice President of Smart Factory Business Units at PDF Solutions, discuss the background of Cimetrix and PDF Solutions. They explore the analytics tools provided by PDF Solutions, the merging of semiconductor and electronics manufacturing, and data handling in these industries. They also discuss different product lines, standards, packaging technologies, data usage, and integration with ERP systems
Nolan’s Notes: Coming to Terms With AI
05/07/2024 | Nolan Johnson -- Column: Nolan's NotesHow fast do things move in the world of data analytics? Here’s an example. We’ve been planning this issue on artificial intelligence for the past few months, and, in fact, I had already written this column about a month ago. Then I went to IPC APEX EXPO and upended it all. I originally had compared AI to drag racing in that (CPU) horsepower and new (data) vehicles have steadily delivered higher performance competition. That seemed pretty accurate given how generative AI models dominated the popular media with amazing results—and sometimes spectacular crashes.
RTX's Advanced Ground System for Space-based Missile Warning Now Operational
05/06/2024 | RTXAn advanced ground system for space-based missile warning developed by Raytheon, an RTX business, is now operational at the U.S. Space Force's Overhead Persistent Infrared Battlespace Awareness Center (OBAC).