Rogers' Power Electronic Solutions to Shed Light on Thermal Management at SPIE Photonics West
January 13, 2016 | Rogers CorporationEstimated reading time: 2 minutes
Rogers Corporation’s Power Electronics Solutions (PES) group plans a strong presence at the upcoming SPIE Photonics West Conference and Exhibition, set for February 13-18, 2016 in San Francisco’s famed Moscone Center.
Photonics West is the world’s largest event for lasers, photonics, and biomedical optics products and technologies, with two exhibitions and a comprehensive technical conference. The show is expected to draw more than 50,000 attendees and will feature more than 4000 technical papers.
Rogers at Booth 309
Representatives from Rogers Power Electronics Solutions (PES) group will be on hand at Photonics West Booth 309 to share insights on the company’s latest thermal management solutions, including its innovative curamik® liquid and passive cooling products. curamik coolers include CoolPerformance and Cool Performance Plus, CoolPower, and CoolEasy product lines. Active water-cooled CoolPerformance and passive CoolEasy products are typically used for removing heat generated by high-power laser diodes. At the show, Rogers PES will also present its new CoolPerformance Plus cooler, which includes a ceramic isolation layer for CTE matching and separating the electrical contact from water. All of these coolers incorporate high-quality copper for excellent thermal conductivity and effective thermal management.
Rogers Speaks at Photonics West
As part of Photonics West, Rogers PES, in partnership with Advanced Cooling Technologies (www.1-act.com), will present a report on ACT’s (unique vapor-deposited Applied Nanoscale Corrosion Resistant (ANCER™) coatings that help extend the operating life of micro-channel copper coolers for cooling laser diodes. Thin, conformal ANCER coatings will provide excellent long-term protection from erosion and corrosion for curamik active liquid coolers. The technical presentation, which will be held on Tuesday, February 16, from 11:30 to 12:30 in the Demo Area 2 (Hall D North), will offer details on testing performed on the ANCER coatings and how they provide effective protection for Rogers curamik and other thermal management products and materials.
Page 1 of 2
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?