Microsurgery Robot Spin-Off Microsure Now Fully Independent
March 4, 2016 | TU EindhovenEstimated reading time: 2 minutes
Microsure, a joint spin-off by TU/e and Maastricht UMC+, this week becomes fully independent. The company’s development of a surgical robot able to perform operations with the utmost precision is almost complete. The robot, which is always controlled by a surgeon, is suited to performing reconstructive surgery that human hands are hardly capable of doing. The device, the first of its kind, should be ready for use in operating theaters within two years.
The first example of the surgical robot will be at the Maastricht UMC+ for the coming two years to demonstrate prudently and gradually that the device is suited for surgical intervention on humans. At the same time, Microsure is working on acquiring the necessary European CE-labeling. In January the company got a loan of a quarter of a million euros from the STW technology association to get the company up and running. This week saw the official launch of the company and agreements were signed with Eindhoven University of Technology and Maastricht UMC+. Both surgeons and engineers are involved in the company.
Five times as precise
The robot’s arms are controlled by a surgeon, via two joysticks. The robot executes the movement of the hands of the surgeon ‘in miniature’, making it five times as precise as its human operator. Moreover, the robot filters out any trembling of the human hand, thereby enhancing the level of precision.
Stitching nerve fibers
The robot is predominantly intended for reconstructive surgery whereby tissue is removed from one part of the body for repair in another part of the body. Operations to stitch blood vessels and nerve fibers to new tissue require such a degree of precision that only a few surgeons are capable of undertaking them. This is due to the fact that any tremor in the surgeon’s own hand limits the precision of its movement. The robot can help these precise movements to become easier and better. The robot also gives the surgeon greater comfort since he no longer has to stand bent over the patient but can sit calmly. Raimondo Cau, chief technology officer of the company: “Since the precision of the surgeon is so well supported, it may now be possible to carry out operations that had been impracticable to date.”
Tackling the cause
The initial focus of Microsure is to tackle lymphedema. Quite a lot of breast cancer sufferers are affected by this due to the occasional impairment of the lymphatic system. This causes fluid to build up in unwanted places. “Currently, only the symptoms tend to be counteracted but the surgical robot will allow the connection of the small vessels to be repaired, and in that way you could tackle the cause of the problem,” Cau explains. “But there are many more operations that we want to do, for example in the area of urology, vascular surgery, plastic surgery and neurology.”
Enthusiasm
Raimondo Cau gained his PhD two years ago from TU/e when he developed the prototype for the surgical robot. His thesis derived from the earlier request posed by the Maastricht UMC+ to TU/e to develop a microsurgical robot, so to this end Cau observed many operations and spoke extensively with microsurgeons. The prototype has now been tried out by many surgeons and has led to enthusiastic reactions. René van der Hulst, plastic surgeon at the Maastricht UMC+ : “The further development of this technology could revolutionize plastic surgery.”
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).