Flexible, Cost-effective and Efficient LED Lighting Panels and Solar Cells
March 22, 2016 | CORDISEstimated reading time: 2 minutes
The project set out to find innovative solutions and develop new technologies to reduce the manufacturing costs of LED lighting panels, solar cells, and other organic electronic devices. Its most important contribution is the development and scaling up of manufacturing processes for new barrier materials and transparent electrodes that are used in advanced flexible optoelectronics.
Transparent electrodes to reduce cost and improve efficiency
Three electrodes-on-flexible substrates, using thin silver, metal fibers, or carbon nanotubes, are either anticipated to start production this year or are already being developed on a commercial scale. Tests were carried out on the new electrodes with different types of optoelectronic devices, using rolls measuring 100 metres in length. The use of such roll-to-roll (R2R) processing is comparable to the methods used for newspaper printing. The new electrodes produced through this method have demonstrated that they are suitable for complex solar cells and light sources.
Crucially the innovative processing methods hold the potential to make solar cells and light sources less expensive in the future. This would bring benefits to consumers but would also facilitate the growth of more environmentally friendly lighting solutions, thus contributing to the European Union’s ambitious climate change objectives.
The electrodes developed by the project are technically as good as the electrodes currently used by the lighting industry that are made indium tin oxide. However, they are cheaper to produce and do not depend on the use of indium. Importantly this does not compromise effectiveness, as the new electrodes are able support a stable light source over a wide area and attain an efficiency of 25 lumens/W. This is comparable to the relatively slower sheet-to-sheet manufacturing process used to produce similar devices.
Additionally, the project consortium also devised new techniques to ensure that the new electrodes are able to operate even when they are bent repeatedly, a test that has the potential to become an industry standard.
Page 1 of 2
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.