Breakthrough for Cheaper Lighting and Flexible Solar Cells
March 24, 2016 | EMPAEstimated reading time: 3 minutes
Such processing techniques promise to make light sources and solar cells much cheaper in future, but require flexible and transparent electrodes and water impermeable barriers – which have also been developed by the TREASORES project. The electrodes from the project are technically at least as good as those currently used (made from indium tin oxide, ITO) but will be cheaper to manufacture and do not rely on the import of indium. Tomasz Wanski from the Fraunhofer FEP said that because of the new electrodes, the OLED light source was very homogeneous over a large area, achieving an efficiency of 25 lumens per watt - as good as the much slower sheet to sheet production process for equivalent devices. In the course of the project, new test methods were developed by the National Physical Laboratory in the UK to make sure that the electrodes would still work after being repeatedly bent – a test that may become a standard in the field.
Special foils protect from oxygen
A further outcome of the project has been the development, testing and production scale-up of new approaches to transparent barrier foils (plastic layers that prevent oxygen and water vapour from reaching the sensitive organic electronic devices). High performance low-cost barriers were produced and it is expected that the Swiss company Amcor Flexibles Kreuzlingen will adopt this technology after further development. Such high performance barriers are essential to achieve the long device lifetimes that are necessary for commercial success – as confirmed by a life cycle analysis (LCA) completed during the project, solar cells are only economically or ecologically worthwhile if both their efficiency and lifetime are high enough. By combining the production of barriers with electrodes (instead of using two separate plastic substrates), the project has shown that production costs can be further reduced and devices made thinner and more flexible.
The main challenge the project had to face was to make the barrier and electrode foils extremely flat, smooth and clean. Optoelectronic devices have active layers of only a few hundred nanometres (less than one percent of the width of a human hair), and even small surface irregularities or invisibly tiny dust particles can ruin the device yield or lead to uneven illumination and short lifetimes.
Knowhow form 15 partners in five nations combined
The TREASORES project united nine companies with six research institutes from five countries and was led by Frank Nüesch from the Swiss Federal Laboratories for Materials Science and Technology (Empa). ”I am very much looking forward to seeing the first commercial products made using materials from the project in 2016”, says Nüesch.
Michael Niggemann, Chief Technology Officer for Eight19 Ltd in the United Kingdom said: ”The TREASORES project was a success for Eight19 as it made a significant contribution to the reduction in manufacturing cost of Eight19’s plastic solar cells. This was achieved through the customized development and up-scaling of low cost barriers and electrodes in the project consortium. It is an essential step towards the commercialization of Eight19’s organic photovoltaic based on technology developed and produced in Europe.”
Page 2 of 2Suggested Items
LPKF is Ready for Increasing Demand for Glass Substrates in the Semiconductor Industry
05/13/2024 | LPKFThe semiconductor industry is shifting towards glass to package the most advanced semiconductor chips. LPKF’s mature LIDE technology is enabling that transition into this new era from ramp-up to high volume manufacturing.
Un-Jammable Quantum Tech Takes Flight to Boost UK’s Resilience Against Hostile Actors
05/13/2024 | BUSINESS WIREReal Time with… IPC APEX EXPO 2024: Modernizing a PCB Facility
05/13/2024 | Real Time with...IPC APEX EXPOAidan Salvi, chief transformation officer at Amitron, discusses modernizing the company's PCB facility including equipment selection, installation, process redefinition, staff upskilling, university engagement, and customer relationship building. Emphasizing that this is a significant endeavor not to be undertaken lightly, Aidan highlights the importance of focus, software technology use, and a step-by-step approach to modernization. He recommends caution when assessing whether to approach factory modernization as one big project or take a more measured approach to modernize in segments.
Star Wars and Disney: ‘Spinning the Script’ With Paul Bailey
05/13/2024 | I-Connect007 Editorial TeamPaul Bailey has quite a story to tell. The current vice president at AOA, and former principal concept technical director for Walt Disney Imagineering gave the opening keynote speech at IPC APEX EXPO 2024. He delved into some of the technological marvels he’s been involved with throughout his career, particularly with Star Wars: Galaxy’s Edge, the new Star Wars experience at Disneyland and Walt Disney World.
Neways Adds Saab to Its Blue-chip Customer Portfolio
05/13/2024 | NewaysNeways, the global innovator in mission-critical technology for leading semicon, connectivity and smart mobility companies, has onboarded Saab as new customer.