High-Growth Wireless Charging Market Matures in 2016
March 29, 2016 | IHSEstimated reading time: 3 minutes
The wireless charging receiver market grew more than 160 percent in 2015 over the previous year, as annual global shipments reached 144 million units. Integrated receivers hit mainstream devices, and refinements to system design and diversification for various applications and power ratings is now driving the development of the technology. Annual shipment volume is expected to top one billion units by 2020 and two billion by 2025, according to IHS Inc., the leading global source of critical information and insight.
The mobile phone market remains the dominant force in overall shipments, led by the Samsung Galaxy smartphone series, which comes equipped with dual-mode Qi and Power-Matters-Alliance- (PMA-) certified low-frequency charging retained for this year’s S7 model. IHS forecasts that 10 percent of smartphones shipped this year will be capable of wireless charging, according to the IHS Wireless Power Receiver Market Report. Meanwhile wearables are already the second largest wireless-charging device category, driven by Apple Watch, Samsung Gear S2 and other popular products. The first high-frequency magnetic resonant receivers are also expected to launch in laptop computers in 2016, as adoption grows across the gamut of device types.
“Device developments and product launches in 2015 helped increase consumer awareness of wireless charging and consumers who have tried it are strongly positive about the experience,” said David Green, research manager for wireless power, IHS Technology. “Once demand is high, manufacturers will find it easier to justify the cost of including it in their devices; however, each application presents its own unique challenges when it comes to cost, form factor and packaging. All wireless charging systems face the challenge of certification, but particularly those with higher power ratings or greater distance from the charger.”
While in the past manufacturers had to force the initial adoption of wireless charging onto the industry, that is no longer the case, as commoditization is already starting to occur for these systems in mobile phones. In 2016 there will be a change in phase for the market and the various new technologies available – moving from the emerging proof-of-concept phase to a more mature product-diversification phase.
Shipments of wireless charging receivers to date were nearly all 5 Watt (W) Qi- or PMA-certified low-frequency systems that typically rely on a charging pad; however, less than half of all receivers sold in 2020 will fall into this category.
Diversification also exists with the variety of standards available to both manufacturers and consumers, which has slowed adoption in some areas. Even the merging of PMA and the Alliance for Wireless Power (A4WP) to form the AirFuel Alliance last year doesn’t yet simplify the standards battle, since the two specifications are not interoperable. The potential adoption of wireless charging by Apple iPhone could also introduce another – as yet unknown -- proprietary technology. “Mainstream commercial launches of uncoupled-technology offerings from companies such as Energous, Ossia, Humavox and uBeam would add further diversification to the market too, although most likely will not occur before 2017 at the earliest,” Green said.
“The wireless charging industry is now focused on building out their product offering to manufacturers in 2016, offering everything from low to high power, low-frequency to high-frequency, and a variety of multi-mode systems that provide interoperability, too,” Green said. “It’s going to be very application-specific, as to which solutions are chosen – whether it’s medium power and multi-frequency for mobile phones or low-power and single-frequency for wearables.”
About IHS
IHS is the leading source of insight, analytics and expertise in critical areas that shape today’s business landscape. Businesses and governments in more than 140 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs nearly 9,000 people in 33 countries around the world.
Suggested Items
Samsung Electronics Begins Industry’s First Mass Production of 9th-Gen V-NAND
04/29/2024 | Samsung ElectronicsSamsung Electronics, the world leader in advanced memory technology, today announced that it has begun mass production for its one-terabit (Tb) triple-level cell (TLC) 9th-generation vertical NAND (V-NAND), solidifying its leadership in the NAND flash market.
TSMC Celebrates 30th North America Technology Symposium
04/29/2024 | TSMCTSMC unveiled its newest semiconductor process, advanced packaging, and 3D IC technologies for powering the next generation of AI innovations with silicon leadership at the Company’s 2024 North America Technology Symposium.
QinetiQ Achieves UK’s First Jet-to-Jet Teaming Between Aircraft and Autonomous Drone
04/29/2024 | QinetiQQinetiQ has successfully trialled the UK’s first Crewed-Uncrewed-Teaming demonstration between a crewed aircraft and an autonomous jet drone.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.