Solar Cell + Battery: TU Graz Researches Hybrid Systems
April 1, 2016 | TU GrazEstimated reading time: 3 minutes
In the FFG project SolaBat, TU Graz is entering almost new research territory. Photovoltaic cells are to be combined into one device with electrochemical energy storage systems.
Whether fair weather or foul, sustainable energy supply must be independent of natural fluctuations of renewable energy sources, such as sunshine. The coupling of “green” energy sources with reliable energy storage systems is a concept as necessary as it is well-known. “Currently single systems of photovoltaic cells which are connected together – mostly lead-based batteries and vast amounts of cable – are in use. Solar panels on the roof with a battery in the cellar. This takes up a lot of space, needs frequent maintenance and is not optimally efficient,” points out Ilie Hanzu from TU Graz’s Institute of Chemistry and Technology of Materials. “We want to make a battery and solar cell hybrid out of two single systems which is not only able to convert electrical energy but also store it.” Hanzu and his team – in cooperation with Graz Centre for Electron Microscopy (ZFE) – is entering largely unknown scientific territory. In the SolaBat project they want to develop a new, application-relevant concept and test its capability.
Combining new materials
The key to success lies in the new combination of functional materials. Hanzu explains: “In the hybrid system high-performance materials share their tasks in the solar cell and in the battery. We need materials which reliably fulfil their respective tasks and which are also electrochemically compatible with other materials so that they work together in one device.” Instead of environmentally damaging cobalt-containing electrodes, eco-friendly titanates will be used as the active materials. Polymer-based cells – in other words, organic solar cells – could also be used. “We have to know what happens when the materials come into contact with each other. For this reason, our project partner, the Centre for Electron Microscopy, is investigating the underlying fundamental interface effects and reactions,” say Hanzu. The other three work packages of the project concentrate on materials for the photovoltaic side and the battery side as well as the compatibility of materials and the assembly of both components into one device.
Hybrid for all
The advantages of a “2 in 1” hybrid system are obvious: it would be space saving, efficient and comparatively simple to manage. In the SolaBat project, the basics are being developed and tested, but even at this early stage a variety of potential applications of such a system are on the horizon – from mobile batteries and car batteries to larger solar panels. Hanzu explains: “Our preliminary work was very promising and I’m confident that at the end of SolaBat we will be able to present a working concept of a photovoltaic battery hybrid. Where exactly such a system will find application – as in many basic research projects – is too early to say, but the possibilities are in any case manifold.” Moreover, in battery research attention should be paid to the fact that different applications have different needs. “With batteries in micro applications or small appliances, such as smartphones, space-saving is primary and weight secondary. In the case of car batteries, in contrast, weight is the most important parameter, space not so much.”
Lead project as incubator
SolaBat is the separated core topic of an earlier funding application for an internal lead project at TU Graz. The basic research project of the Climate and Energy Fund is now supported by the Austrian Research Promotion Agency in the funding line emerging technologies. The novel, internal university funding concept lead project was thus an incubator for SolaBat. In the coming years, some 700,000 euros will be made available to the Institute for Chemistry and Technology of Materials of TU Graz together with the Centre for Electron Microscopy (ZFE) from Austrian Cooperative Research.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.