Robots Get Creative To Cut Through Clutter
May 19, 2016 | Carnegie Mellon UniversityEstimated reading time: 2 minutes
Clutter is a special challenge for robots, but new Carnegie Mellon University software is helping robots cope, whether they’re beating a path across the Moon or grabbing a milk jug from the back of the refrigerator.
The software not only helped a robot deal efficiently with clutter, it surprisingly revealed the robot’s creativity in solving problems.
“It was exploiting sort of superhuman capabilities,” Siddhartha Srinivasa, associate professor of robotics, said of his lab’s two-armed mobile robot, the Home Exploring Robot Butler, or HERB. “The robot’s wrist has a 270-degree range, which led to behaviors we didn’t expect. Sometimes, we’re blinded by our own anthropomorphism.”
In one case, the robot used the crook of its arm to cradle an object to be moved.
“We never taught it that,” Srinivasa added.
The rearrangement planner software was developed in Srinivasa’s lab by Jennifer King, a Ph.D. student in robotics, and Marco Cognetti, a Ph.D. student at Sapienza University of Rome who spent six months in Srinivasa’s lab. They will present their findings May 19 at the IEEE International Conference on Robotics and Automation in Stockholm, Sweden.
In addition to HERB, the software was tested on NASA’s KRex robot, which is being designed to traverse the lunar surface. While HERB focused on clutter typical of a home, KRex used the software to find traversable paths across an obstacle-filled landscape while pushing an object.
Robots are adept at “pick-and-place” (P&P) processes, picking up an object in a specified place and putting it down at another specified place. Srinivasa said this has great applications in places where clutter isn’t a problem, such as factory production lines. But that’s not what robots encounter when they land on distant planets or, when “helpmate” robots eventually land in people’s homes.
P&P simply doesn’t scale up in a world full of clutter. When a person reaches for a milk carton in a refrigerator, he doesn’t necessarily move every other item out of the way. Rather, a person might move an item or two, while shoving others out of the way as the carton is pulled out.
The rearrangement planner automatically finds a balance between the two strategies, Srinivasa said, based on the robot’s progress on its task. The robot is programmed to understand the basic physics of its world, so it has some idea of what can be pushed, lifted or stepped on. And it can be taught to pay attention to items that might be valuable or delicate, in case it must extricate a bull from a china shop.
One limitation of this system is that once the robot has evaluated a situation and developed a plan to move an object, it effectively closes its eyes to execute the plan. Work is underway to provide tactile and other feedback that can alert the robot to changes and miscalculations and can help it make corrections when necessary.
NASA, the National Science Foundation, Toyota Motor Engineering and Manufacturing and the Office of Naval Research supported this research.
Suggested Items
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Intel Gaudi, Xeon and AI PC Accelerate Meta Llama 3 GenAI Workloads
04/22/2024 | Intel CorporationMeta launched Meta Llama 3, its next-generation large language model (LLM). Effective on launch day, Intel has validated its AI product portfolio for the first Llama 3 8B and 70B models across Intel® Gaudi® accelerators, Intel® Xeon® processors, Intel® Core™ Ultra processors and Intel® Arc™ graphics.
Real Time with... IPC APEX EXPO 2024: Integrating Automation into the North American PCB Market
04/18/2024 | Real Time with...IPC APEX EXPODan Beaulieu introduces James Chien from SAA Symtek Automation Asia and Jason Perry from Technica, who are bringing automation to the North American PCB market. They discuss their expertise in automation, equipment sets, and growing opportunities. The focus is on integrating automation into existing shops, considering hardware, software, and flexibility. They also discuss the challenges of modernizing domestic shops and the potential of expanding automation to other markets.
Mobileye EyeQ6 Lite Launches to Speed ADAS Upgrades Worldwide
04/17/2024 | BUSINESS WIREMobileye announced it has delivered the first production-candidate hardware and software of its new EyeQ™6 Lite system-on-chip to its customers, which will power advanced driver-assistance systems in multiple models launching this year.
Yamaha to Showcase Latest-generation Assembly Equipment and Software Tools at SMTconnect
04/16/2024 | Yamaha Robotics SMT SectionYamaha Robotics SMT Section will team with its distributor ANS Elektronik to showcase innovations for high-speed surface mount assembly at SMTconnect 2024.