New Device Steps Toward Isolating Single Electrons for Quantum Computing
May 23, 2016 | Argonne National LaboratoryEstimated reading time: 4 minutes
If biochemists had access to a quantum computer, they could perfectly simulate the properties of new molecules to develop novel drugs in ways that would take the fastest existing computers decades.
Electrons represent an ideal quantum bit, with a "spin" that when pointing up can represent a 0 and down can represent a 1. Such bits are small — even smaller than an atom — and because they do not interact strongly, they can remain quantum for long periods. However, exploiting electrons as qubits also poses a challenge because they must be trapped and manipulated. Which is exactly what David Schuster, assistant professor of physics, and his collaborators at UChicago, Argonne National Laboratory and Yale University have done.
"A key aspect of this experiment is that we have integrated trapped electrons with more well-developed superconducting quantum circuits," said graduate student Ge Yang, lead author of the Physical Review X paper that reported the group's findings. The team captured the electrons by coaxing them to float above the surface of liquid helium at extremely low temperatures.
"It's a very important step along the way to being able to study single electrons and make those electrons work as quantum bits," Schuster said.
While electrons in vacuum store quantum information nearly perfectly, in real materials the jiggling of surrounding atoms disturbs them. Electrons have a unique relationship with liquid helium, however. They levitate above the surface, insensitive to the frothy atomic fluctuations below. This occurs because electrons see their own mirror image across the surface of the helium.
Because their image has opposite charge, they are attracted to their own reflection, like Narcissus of Greek mythology. But quantum mechanical effects make them jiggle and move away. Attraction and repulsion balance out at about 10 nanometers above the surface of the helium — quite far, by atomic standards — and that's where the electrons stay.
"We can trap the electrons and hold them for basically as long as we want," said co-author Gerwin Koolstra, a graduate student in physics. "We've left them there for 12 hours, and then we got bored."
"Electrons levitating, who would have guessed that? It's just a crazy thing," Schuster said. While this effect has been known, he said, "we're holding them in a superconducting structure that allows us to interact with them, on much faster timescales, and much more sensitively."
That structure is a "resonator" of a type Schuster's lab developed for other work with quantum circuits, but incorporate the helium and trapped electrons. Because they are so small, electrons normally interact only very weakly with electrical signals. A resonator works like a hall of mirrors, allowing the signal to bounce back and forth more than 10,000 times, giving the electron more time to interact. It is this setup that makes it possible to build a qubit, while making the measurement extremely sensitive.
The scientists look at the microwave photons emerging from the resonator and monitor that signal as they slowly let electrons leak from the trap.
Building the device was a delicate business. "The most challenging part was the size and the placement of all of the features with respect to each other, which really requires specialized equipment," said David Czaplewski, a scientist at Argonne's Center for Nanoscale Materials, who helped design and build it. The important features are around 100 nanometers — 1,000 times smaller than the diameter of a human hair. And they had to be placed with an accuracy of about 10 or 20 nanometers, the span of about 30 atoms, inside a channel that's one micron deep and 500 nanometers wide.
Argonne's specialized equipment
"We couldn't have done it without Argonne's clean room facility and the fantastic staff scientists there," Schuster said. "The process involves a fair amount of chemistry and a number of specialized instruments, which requires deep technical know-how to get it to work. It wasn't just one piece of equipment or another. It was the whole facility."
The device is a circuit etched into a thick layer of niobium on a bed of sapphire, the same material used on the surface of Apple watches. Aluminum wires deposited on the bottom of the channel respond to applied electrical voltages and helps keep the floating electrons trapped in place.
At the beginning of the experiment, the team first floods the sample with superfluid helium. This is the only element that remains a liquid even at a hundredth of a degree above absolute zero — the temperature at which the experiments are conducted.
The electrons themselves come from the tungsten filament of a miniature toy light bulb often used as streetlights in model train layouts. As the bulb heats up, electrons "boil" off and fly onto the surface of the cold superfluid helium.
In the first wave of experiments, the scientists have been working with about 100,000 electrons — too many to count or control quantum mechanically. But they are whittling the number down. The goal is a trap that would hold just a single electron whose behavior can be analyzed and controlled for use as a quantum bit.
"We're not there yet, said Schuster. "But we're pretty close."
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.