-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: Less than a minute
Contact Columnist Form
Primary Imaging for Pattern Plating, Part 2—Development
Introduction
The proper development of the primary photoresist is critical to the overall success of the imaging process and in turn the processes that follow—either etching to form innerlayers or the electroplating processes on outer layers. In this step, the unexposed photoresist (after resist lamination and exposure) is washed away via the developing process. Further, the quality of the electroplated trace, pad and via are influenced by the developing process. Why is this an issue? Well, for the electrolytic copper to adhere to a developed surface it must be free of resist residues and the adhesion promoters in the unexposed resist. This means that the unexposed resist gets solubilized by the action of the chemicals in the developing operation. Typical developing chemistry for aqueous photoresists is made up of either solutions of sodium carbonate or potassium carbonate.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
More Columns from Trouble in Your Tank
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5Trouble in Your Tank: Electrodeposition of Copper, Part 6
Trouble in Your Tank: Electrolytic Copper Plating, Part 5
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 4
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 3
Trouble in Your Tank: Electrodeposition of Copper, Part 4—Addition Agents
Trouble in Your Tank: Lead-free and the Fabrication Challenge, Part 1
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 2