Digital Help for Operating Room Assistants
July 5, 2016 | TU DelftEstimated reading time: 2 minutes
There is still much to be gained when it comes to how operating rooms (OR) are organised. Such advances would help to avoid medical errors. Researcher Annetje Guédon has succeeded in implementing several concrete technological improvements for the OR. On Tuesday, 5 July 2016, she will obtain her doctorate from TU Delft with research into this subject.
Patient safety
‘The objective of my research was to develop technology that could help health care professionals to improve patient safety and increase efficiency in operating rooms’, explains Annetje Guédon.
‘In practice, operating room assistants do their best to support OR processes. Everyone in the OR does absolutely everything they can, but when looking at how things are organised, we think that there is still much to be gained. One possibility is offering technological support. But such technology needs to mirror the assistance offered by operating room assistants – it cannot be rigid, but has to be capable of adjusting to change’.
Concrete solutions
Guédon turned her attention to several aspects in practice: OR devices, the delivery process of surgical instruments and OR scheduling. During her research, she collaborated with the Reinier de Graaf hospital in Delft.
‘We firstly looked at devices in the OR, easily about 20 different ones’, says Guédon. ‘Of course, they all need to be working properly, tested and checked. Unfortunately, the system currently in use, using stickers, is quite old-fashioned. As you can imagine, stickers are not always checked in practice’.
‘That is why we worked together with a company called DoubleSense to develop a track and trace system. This system displays the status of all OR devices (and possible defects) at a single glance, and also keeps the overview up to date. This system was a success, it has already been marketed as a commercial product, and is in use in the hospital’.
Scalpels
Secondly, Guédon researched the delivery process of surgical instruments, such as scalpels. They need to be sterilised after use, which represents a serious logistical challenge for the operating room and sterilisation department. ‘At the moment, if there is a problem with an instrument, it is replaced by the operating room assistants. They quickly arrange another instrument. But that can take a lot of their time and lead to stress situations – something that we would prefer to avoid. That is why we implemented a just-in-time system for the delivery of surgical instruments. This system has also already been successfully implemented in the Reinier de Graaf hospital’.
Scheduling
‘The third part of my research is about operating room scheduling. It is important to know how a surgical procedure is progressing and (approximately) how long it will last. We have researched if it is possible to detect the progress of a surgical procedure based on the activity of surgical devices, which can be measured using a current sensor. ‘The results are interesting and promising. But we still have some way to go before this concept can be implemented in practice’.
DORA
This third element of the research is one of the subjects that will be explored in more detail in DORA (Digital Operating Room Assistant), the multidisciplinary and umbrella project. ‘The Reinier de Graaf hospital and the TU Delft work together on setting up a research OR, a realistic operating room in which this type of data can be recorded. That is a huge step in the right direction. It is crucial that we continue to involve people from all disciplines in this research.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.