Dense Yet Transparent Materials Offer New Way to Control Light
July 18, 2016 | OSAEstimated reading time: 3 minutes
Researchers recently made the surprising discovery that a special class of materials called “hyperuniform materials” can be both dense and transparent. This work demonstrates a new way to control light and could lead to novel materials for many light-based applications including solar photovoltaics. Hyperuniform materials can be made of plastic or glass that contains light-scattering particles spaced in a disordered, but not completely random, pattern.
In The Optical Society's journal for high impact research, Optica, researchers led by Rémi Carminati, Institut Langevin, ESPCI Paris and CNRS, France, detail the transparency properties they discovered using computer simulations and outline a theory to explain the wavelengths of light for which hyperuniform materials appear transparent.
“We showed that hyperuniform materials can be transparent for certain wavelengths while at the same time being very dense,” said Carminati. “Our work is very fundamental and we have found something very new.”
Optical properties of hyperuniform materials
Although hyperuniform materials have been studied for the last decade, their optical properties are only recently being uncovered. Researchers previously showed that a hyperuniform material is transparent when it has a particle density that allows light going through the material to interact with each particle no more than once.
“Typically if you make a material denser, it will scatter light more and thus appear opaque,” said Carminati. “However, what we've shown is that if you make the hyperuniform material denser to the point where light will interact with many particles on its way through the material, you can still observe transparency. This is really unexpected, and nobody has examined it before.”
This surprising characteristic of dense hyperuniform materials occurs because of the microscopic-scale ordering of the particles in the material. Although the uniformly spaced particles scatter light in all directions, most of the light waves interfere with each other, stopping all the scattered light except for light traveling in the forward direction through the material. This means that the light entering the material continues in the forward direction as if it was going through a homogeneous material, making the material appear transparent. The wavelengths of light for which the material is transparent depend on the exact characteristics of the material used.
The dense hyperuniform materials are highly ordered at a scale of about 1 micron, but remain disordered at a larger scale. This property makes the materials less prone to fabrication errors, which means they could be made in large pieces. Commercial techniques such as lithography could be used to make a hyperuniform material like the one simulated in this study, but Carminati says that developing a fabrication technique that produces hyperuniformity in a natural way could allow manufacturing of such materials in large quantities.
Controlling light waves
“When light waves interact with a material, the scattering that typically occurs destroys many interesting properties of the waves,” said Carminati. “Our work shows that it is possible to use the material itself to control the way the waves propagate. This is a big paradigm change. Producing specific materials that are transparent for a spectral region for which you don't expect the material to be transparent is just one example of what can be done.”
Carminati points out that while applications for these dense, transparent materials are a long way off, the new study shows the potential for making materials that offer a variety of optical properties. For example, a material could be made to change from randomly spaced particles to perfectly spaced particles in response to an external electric field, thus switching from appearing white to being transparent.
Hyperuniform materials might also be useful for photovoltaics because they offer a way to manipulate how diffuse light enters a material and is absorbed by the particles. Tuning the material so that it is very absorbent across a wide variety of wavelengths could be used to convert light into energy.
Since light waves behave much like acoustic and quantum waves, materials that are dense and transparent could, in principle, be designed for other types of waves. “What we have demonstrated is not specific to optics,” said Carminati. “It likely applies to wave physics in general and could open up new applications in other fields.”
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.