Study Uses GPS Technology to Predict Football Injuries
August 3, 2016 | University of BirminghamEstimated reading time: 3 minutes
Footballers' injuries may be predicted by looking at players' workloads during training and competition, according to new research.
Researchers discovered that the greatest injury risk occurred when players accumulated a very high number of short bursts of speed during training over a three-week period.
The University of Birmingham and Southampton Football Club worked together to analyse the performance of the performance of youth players and observe the links between training and injury - publishing their findings in the British Journal of Sports Medicine.
The findings now provide a set of initial guidelines for helping to reduce the occurrence of injuries in elite youth football. They show that GPS technology and accelerometers can be used to predict the risk of both contact and non-contact injuries.
The study is the first to monitor injury risk using the GPS technology used to track players' speed and acceleration - from both training and competition in football.
Lead researcher Laura Bowen is the First Team Data Scientist at Southampton FC and studying under the supervision of Dr François-Xavier Li for her PhD in Sport Sciences at the University of Birmingham, in the UK. She said of the study's findings:
"Our research has huge practical and scientific application. It expands on a recent body of literature in rugby league and cricket which has proposed that the prescription of workloads may be more indicative of injury than the load itself.
"The results of our study demonstrate this, with high, excessive workloads associated with the greatest injury risk. However, when the players were exposed to these high loads progressively, over a period of time, the risk of injury reduced significantly.
"Ultimately, players who safely train harder, may develop a greater resilience and tolerance for the intensity and fatigue of competition by increasing their physical capacities."
Dr François-Xavier Li, from the University's School of Sport, Exercise and Rehabilitation Sciences, said: "To increase the chances of success, coaches give players training loads which push the boundaries of what footballers can achieve without exceeding what their bodies can tolerate.
"An appropriate balance is required between training, competition and recovery to hit peak performance, whilst avoiding injury. However, this balance is not always adequately maintained - highlighted by the higher injury rate in football than many other team sports.
"These findings provide initial guidelines for optimal workloads to reduce the occurrence of injury in elite youth football, but we should be cautious about directly applying this work to different teams and sports due to the specific nature of football's physical demands."
The study used a range of player performance data gathered by GPS equipment worn by the players in training, including: total distance covered; distance covered at high speed; total load/forces experienced; and short bursts of speed.
This data was then analysed in relation to 'recordable injuries', which caused an absence from football activity - classified as mild, moderate or severe - of anything from a couple of days to several weeks. The study found that:
- High level of acceleration over a three-week training period was the strongest indicator of overall and non-contact injury risk;
- High total distance (in excess of 112km) covered over a four-week period and high weekly total loads significantly increased the risk of overall and non-contact injuries;
- Moderate-to-high levels of distance covered at high speed resulted in higher overall and non-contact injury incidence respectively; and
- Very high weekly total loads and intense levels of short bursts of speed were significantly related to a higher risk of contact injury.
The findings suggest training should be organised so that distance covered at high speed and total load/forces experienced fluctuate across a four-week period, with both high and low workloads achieved.
Footballers who can safely train harder may develop greater resilience and tolerance for the increasing intensity and fatigue of competition.
It is known that higher workloads are linked with contact injuries in professional rugby. The study suggests that a higher level of fatigue relates to contact injury than non-contact injury. By increasing fitness levels and limiting fatigue, players may be able to respond more quickly to avoid rapid, unpredictable movements that precede contact injury.
However, in the current study the large prevalence of contact injuries in competition goes further to highlight the importance of monitoring the difference between normal training activity and exceptional 'spikes'. This is particularly relevant during fixture congested periods or tournaments, when it is a challenge to ensure adequate recovery between games, whilst maintaining optimum training loads.
Suggested Items
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Atg Luther Maelzer to Showcase Latest Generation Automatic Flying Probe Test System at IPC APEX EXPO 2024
04/01/2024 | atg Luther & Maelzeratg Luther Maelzer (a Mycronic company) will showcase their latest technology, the A9 with Automation (A9aL), at the upcoming IPC APEX EXPO. The A9AL will be on display from April 9th through the 11th on the show floor at the Anaheim Convention Center in Booth 4829.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.