Communicating With Light
November 4, 2016 | Rensselaer Polytechnic InstituteEstimated reading time: 5 minutes
As demand for mobile wireless services continues to grow, and the deployment of the Internet of Things (IoT) technologies expands, Visible Light Communication (VLC) is emerging as a potential broadband transmission technology that may offer an unlimited bandwidth spectrum for high-quality wireless services. Recently, the Center for Lighting Enabled Systems & Applications (LESA) at Rensselaer Polytechnic Institute developed the world’s first high-speed visible-light transmission link with a fully integrated microchip receiver.
VLC technology, sometimes referred to as “Li-Fi,” uses LED light instead of RF signals for high-speed wireless communications.
The term Li-Fi, short for “light fidelity,” describes the emerging use of VLC for wireless data access. Li-Fi shares the same delivery concept as Wi-Fi except that data is wirelessly transmitted via electromagnetic waves in the visible instead of the invisible RF electromagnetic range. LEDs transmit data through modulation. The modulation is so fast and subtle that it is imperceptible to the human eye and does not interfere with the quality of illumination.
Still, there are many hurdles to overcome before Li-Fi becomes ubiquitous. One challenge is the ability to sustain continuous connectivity as a smartphone, laptop, or other electronic device is moved about in a space.
In the cellular communications world, this technique is called handover—the process of linking phone calls or data wirelessly from one point to another. This allows us to maintain a phone call as we are traveling between cell towers.
Mona Hella, associate professor in the Department of Electrical, Computer, and Systems Engineering in the School of Engineering at Rensselaer, is leading the sensors thrust in LESA to investigate new types of light sensors and signal processing circuits that could make VLC linking capability a reality.
Hella’s research team, that includes Bassem Fahs, a LESA research associate, is creating arrays of photodetectors that can serve as multichannel receivers and light sensors to allow the tracking of light, from one LED fixture to the next. She is also working to increase the bandwidth of the standard silicon-based photodiode to receive the high-speed data streams wirelessly from the solid-state light sources.
“Conventional photodiodes are photodetectors that convert light into current,” said Hella. “They are inexpensive to manufacture and are used in a multitude of applications in everything from cameras, smoke detectors, and CAT scanners, to barcode scanners and some airport security inspection equipment.”
Hella noted that in a VLC system, photodiodes integrated into optical receivers capture the incident light (the light directly aimed at a subject) needed for electric current generation. One drawback is that these photodiodes also collect unwanted ambient light, the reflected light that bounces off the walls, for instance. In research terminology, this is called “noise.”
Hella is tackling a two-pronged problem: The surface areas of the photodiode need to be enlarged to capture more incident light, but without collecting unwanted noise and dramatically affecting the capacitance of the photodetector that limits the speed of the communication channel.
Hella says Li-Fi and other emerging VLC technologies are important elements in making smart lighting an inherent part of the Internet of Things (IoT), a wireless infrastructure that connects devices and whole systems, ranging from our phones and kitchen appliances to roads, vehicles, and the electric grid, to obtain and share data like never before. By using Li-Fi to help bear the data load, higher bandwidth wireless communications are maintained as more IoT objects compete for RF bandwidth.
“The technology cannot be disruptive unless it is integrated with standard microchip technology,” Hella said. “It’s this basic idea of using these different lighting technologies that will be an integral part of the smart world around us.”
According to LESA researchers, VLC has the potential to add significant value to existing lighting infrastructure, enabling cost-effective, high-bandwidth, wireless, lighting-enabled communications. As soon as LEDs replace conventional lighting, VLC can be employed in a wide variety of industrial, commercial, and residential applications.
“At LESA, we want to build smart lighting systems that automatically adjust the right lighting for us at any given time, with light coming from the right direction, with the right color and intensity, optimized for human health and productivity,” said LESA Director Robert Karlicek, who also serves as a professor in the Department of Electrical, Computer, and Systems Engineering. ”At the same time, we want to develop smart lighting systems that will provide information to us, directly through the light, which will be faster than the radio frequencies we now use.”
LESA (formerly known as the Smart Lighting Engineering Research Center, or ERC), established in 2008 with a $35 million grant from the National Science Foundation (NSF), is one of 19 currently supported ERCs in the United States. The purpose of the ERCs is to develop interdisciplinary research and education programs, in partnership with industry, aimed at accelerating the commercialization of university research. The goal is to advance technology and innovation to address significant societal problems and enhance the foundation for economic competitiveness.
The research at LESA exemplifies The New Polytechnic, an emerging paradigm for teaching, learning, and research at Rensselaer. The New Polytechnic emphasizes and supports collaboration across disciplines, sectors, and regions to address the great global challenges of our day, using the most advanced tools and technologies, many of which are developed at Rensselaer.
About the Center for Lighting Enabled Systems & Applications (LESA) ERC
Funded primarily by the National Science Foundation (NSF), the LESA ERC is an interdisciplinary, multi-university center developing “Smart Lighting Systems that See and ThinkTM”. The center engages faculty members, graduate students, research staff, and undergraduates to work on research leading to smart lighting systems with adaptive and controllable properties that will change the way society uses lighting. The center joins academia, industry, and government in partnership to produce transformational engineered systems, along with engineering graduates who are adept at innovation and primed for leadership in the global economy. The LESA ERC is headquartered at Rensselaer Polytechnic Institute in Troy, NY, and partners with Boston University, The University of New Mexico, and Thomas Jefferson University to achieve its objectives.
About Rensselaer Polytechnic Institute
Rensselaer Polytechnic Institute, founded in 1824, is America’s first technological research university. The university offers bachelor’s, master’s, and doctoral degrees in engineering; the sciences; information technology and web sciences; architecture; management; and the arts, humanities, and social sciences. Rensselaer faculty advance research in a wide range of fields, with an emphasis on biotechnology, nanotechnology, computational science and engineering, data science, and the media arts and technology. The Institute has an established record of success in the transfer of technology from the laboratory to the marketplace, fulfilling its founding mission of applying science “to the common purposes of life.”
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.