National Wind Technology Center Begins First Validation of Wave Energy Conversion Device
January 16, 2017 | NRELEstimated reading time: 1 minute
The National Wind Technology Center (NWTC) at the Energy Department's National Renewable Energy Laboratory (NREL) has begun validation work on the first water power technology ever tested in an NREL dynamometer facility.
"Though designed to benefit the wind industry, the NWTC's large dynamometer facility is being leveraged to help advance new ocean energy technology," said NWTC Director Daniel Laird. "While still in the early stages of development, ocean energy is progressing rapidly. Over the coming decades, ocean energy could become a major source of electricity powering high-population-density areas near the coasts."
NREL is working with Columbia Power Technologies' StingRAY wave energy converter. Designed to deliver electricity at a competitive cost while having a low environmental impact, its floats and generators convert the energy in ocean waves into electricity.
"We are testing the StingRAY at the NWTC because the core design is similar to a wind turbine-it is direct drive, but with a very large diameter," Columbia Power Technologies CEO Reenst Lesemann said. "The dynamometer can mimic the sea, with back-and-forth oscillation, and will put the generator through its paces to ensure it can withstand ocean forces."
Mechanical testing of the StingRAY generator, which is as tall as a two-story building and the largest generator ever tested in an NWTC dynamometer, is now under way. Over the next few months, the unit will be connected to the NWTC's Controllable Grid Interface for electrical performance characterization.
"We have one of the only facilities in the country with a dynamometer that can apply rotational torque at the speeds and forces required while also applying non-torque loads-which are side forces that simulate the action of a rogue wave hitting a wave energy converter in the ocean," said Mark McDade, NWTC project manager. "This matters because the structures of these energy conversion devices must be designed to handle the side forces without damage. The work is pioneering in the field of ocean energy conversion." This land-based validation effort, which is co-sponsored by Columbia Power Technologies and the Department of Energy's Water Power Technologies Office, will occur prior to an open-water demonstration of the system scheduled for 2017 at the U.S. Navy's Wave Energy Test Site in Hawaii.
NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for the Energy Department by The Alliance for Sustainable Energy, LLC.
Suggested Items
Keynote Preview: Reshaping our Engagement With the World
03/28/2024 | Shawn DuBravac, IPCThe widespread integration of AI across various sectors is broadening its impact, from revolutionizing healthcare with Smart solutions to transforming homes into intuitive spaces, highlighting its crucial role in boosting efficiency and addressing complex challenges. In healthcare, we're witnessing a trend toward personalized care with AI-driven devices like intelligent pillows to mitigate snoring, sophisticated sleep monitors, and innovative patient monitoring systems.
SEMI ESD Alliance 2024 CEO Executive Outlook to Explore the Evolving RISC-V Movement and Semiconductor Design Ecosystem
03/27/2024 | SEMIKey executives from leading semiconductor EDA and IP companies will gather to discuss the latest industry trends, challenges and opportunities Thursday, May 9, in Santa Clara, California at the annual CEO Executive Outlook, hosted by the Electronic System Design Alliance (ESD Alliance), a SEMI Technology Community, and Keysight Technologies. Registration opens soon.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,
Mycronic's Global Technologies Makes Acquisition in Germany
03/22/2024 | MycronicMycronic’s Global Technologies division has signed an agreement to acquire Vanguard Automation, a company headquartered in Karlsruhe, Germany, which has developed a technology and automated equipment for 3D microfabrication of optical interconnects.
Qualcomm Brings the Best of On-Device AI to More Smartphones with Snapdragon 8s Gen 3
03/18/2024 | Qualcomm Technologies, Inc.Qualcomm Technologies, Inc. announced the Snapdragon® 8s Gen 3 Mobile Platform, delivering the most sought-after 8 series capabilities to more Android flagship smartphones, for extraordinary, premium experiences.