Reducing Read Errors More Than a Bit
February 10, 2017 | A*STAREstimated reading time: 2 minutes
While we aspire to store increasing amounts of digital data on ever smaller devices, conventional memory technologies based on electron charge are reaching a physical limit on how much they can store in a given space. Alternative storage methods are urgently needed.
Kien Trinh, Sergio Ruocco and Massimo Alioto at the A*STAR Data Storage Institute and National University of Singapore are investigating a promising storage technique called spin-transfer torque magnetic random-access memory (STT-MRAM). In their pursuit, the researchers have developed a voltage-boosting scheme for an STT-MRAM system, which greatly reduces errors incurred when reading data.
STT-MRAM works by exploiting electrons’ intrinsic angular momentum, or spin, rather than their charge. Electron spin can take only two values — up or down — and a standard electrical current contains approximately equal numbers of each. STT-MRAM uses a spin-polarized current, which has more of one spin type than the other, to exert a torque on magnetized ‘bitcells’. This flips the bitcell orientation to high or low states and thereby writes binary data. To read data, the surrounding circuitry must then detect small changes in the resistance of the bitcell, a difficult task to achieve without errors.
“In the physical process of reading STT-MRAM there is an established trade-off between read disturbance (the chance of unintentionally flipping the bitcell when you read it) and read decision (reading the wrong value currently stored in the bitcell),” says Trinh. “To lower the read disturbance, the read current has to be small. However, a larger read current helps us distinguish between the high and low resistance states of the bitcell.” In other words, if you reduce one error, you increase the other.
Trinh and co-workers trialed a new read scheme in which the voltage in the system was boosted by switched capacitors. They performed extensive statistical simulations to find optimum electronic design settings that minimize the impact of natural variations.
“We achieved a rate of just one error per billion bitcell reads, compared to the conventional sensing scheme which has one per ten million,” says Alioto. “What’s more, our system is one of the first that can achieve so few errors while remaining suitable for low-power and low-voltage applications.”
The team are hopeful they can prove their design concepts on real devices in the near future, and contribute to the commercialization of this emerging technology. “We think STT-MRAM could be available on the consumer market within three to five years,” says Ruocco.
The A*STAR-affiliated researchers contributing to this research are from the Data Storage Institute. For more information about the team’s research, please visit the GREEN IC (Green Resilient Energy Efficient Nanoscale Integrated Circuits) webpage.
Suggested Items
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).