'Editing' New Metamaterials Brings Light Into Focus
February 14, 2017 | University of California - BerkeleyEstimated reading time: 3 minutes
As cell phones have become smaller, so have their camera lenses. Phones thinner than a cut deck of cards now capture images so sharp that they can be blown up beyond movie-poster size.
When arrayed in nano-scale thin sheets, a familiar compound can be selectively heated to transform part of it into a metal yet leave the remainder transparent, an innovation that provides a range of potential applications. Photo: Peg Skorpinski
But the camera’s convex lenses impose an inherent limit on how thin the phone can be. With more than a billion-plus cell phones bought last year, manufacturers faced an unwelcome choice: either make a thicker camera or sacrifice the quality of the photos.
Now, another type of lens may be emerging, one with light-focusing power that does away with the classic convex piece of glass or plastic. Instead, it relies on “metamaterials” — fabricated arrays of nano-structures so named because they perform unlike any other natural substances.
Metamaterials are made of millions of nano-scale particles, each about the size of a virus. Although the particles themselves are made of atoms, their novel effects on material’s performance have earned them the name “artificial atoms.”
Materials scientist Jie Yao is developing a technique to fabricate one such metamaterial into a new form with strong commercial potential. He can transform a natural phase change material in a way that seems like alchemy, turning some sections of the material into metal but leaving others unchanged.
The metallic portions can interact with light as if they were nanoscale antennas, and Yao has shown that in certain conformations, the combined effect of tens of thousands of these antennas can focus light like a lens.
With support from the Bakar Fellows Program, his lab in the materials science and engineering department is fabricating nano-thin sheets of phase change material. The material is glass-like at room temperature but becomes metallic when heated slightly. Using a local heat source, Yao is able to convert part of the thin sheets into the metal antennas while letting other parts remain transparent.
The interactions of the nano-antennas with light are so effective that films hundreds of times thinner than a conventional lens could tightly control the path of light that passes through the film, Yao says.
He intends to refine his technology’s novel ability to tweak the metallic components’ 3-D shape, and he hopes to open up a range of applications to control visible light as well as infrared and microwave wavelengths.
“The metallic phase change material is the working part of the material, while the insulating part provides the matrix to hold the ‘artificial atoms’ in place,” Yao says.
“When a broad beam of light hits the array, it can be considered as composed of many finer beams. Each new beam passes by an antenna, which is able to change its unique path.
“Using a local heat source, we can ‘write’ new structures into the material. Then, by lowering the temperature, we can erase and re-write them. We can change the material’s structure, and performance at will. No complicated nano-fabrication process is needed.”
By using this etch-a-sketch local heating strategy, his team can change the material’s configuration in real time — potentially in less than a second. “In this we may be able to create a dynamic optical device, for example, a single lens whose focus can be changed whenever necessary,” Yao says.
The array can be “written” in such a way that each antenna will guide light to the same focal point to form a lens. The next moment, the array can be erased and a new array may be written, and the focal point changed to another location, which could be used to improve the performance of photography and other imaging processes.
Beyond the vision of new lenses for a billion cell phones, the technology’s ability to control visible light could yield-thin computer or wall displays. In principle, Yao says, the material and the transforming technique can yield conformations to manipulate infrared light, or microwave radiation as well, leading to novel types of infrared sensors and other optical devices.
“The material is a platform that allows us to draw any photonic structure, so we really can achieve a range of applications and transform them from static devices to dynamic ones.”
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.