Designing New Materials from ‘Small’ Data
February 22, 2017 | McCormick Northwestern EngineeringEstimated reading time: 3 minutes
Finding new functional materials is always tricky. But searching for very specific properties among a relatively small family of known materials is even more difficult.
But a team from Northwestern Engineering and Los Alamos National Laboratory found a workaround. The group developed a novel workflow combining machine learning and density functional theory calculations to create design guidelines for new materials that exhibit useful electronic properties, such as ferroelectricity and piezoelectricity.
Few layered materials have these qualities in certain geometries — crucial for developing solutions to electronics, communication, and energy problems — meaning there was very little data from which to formulate the guidelines using traditional research approaches.
“When others look for new materials, typically they look in places where they have a lot of data from similar materials. It’s not necessarily easy by any means, but we do know how to distill information from large datasets,” said James M. Rondinelli, assistant professor of materials science and engineering in the McCormick School of Engineering. “When you don’t have a lot of information, learning from the data becomes a difficult problem.”
The research is described in the paper “Learning from data to design functional materials without inversion symmetry,” appearing in the Feb. 17, 2017, issue of Nature Communications. Prasanna Balachandran of Los Alamos National Lab in New Mexico is the paper’s coauthor. Joshua Young, a former graduate student in Rondinelli’s lab, and Turab Lookman, a senior researcher at Los Alamos, also contributed.
Supported by funding from the National Science Foundation and the Laboratory Directed Research and Development Program through Los Alamos, Rondinelli’s group focused on a class of two-dimensional complex oxides — or Ruddlesden-Popper oxides. These materials exhibit many technology-enabling properties, such as ferroelectricity and piezoelectricity, and can be interfaced with traditional semiconductor materials found in today’s electronic devices.
“In this family, the data set is puny. Currently, there are only around 10 to 15 materials that are known with the desired properties,” Rondinelli said. “This is not much data to work with. Traditionally data science is used for big data problems where there is less of a need for domain knowledge.”
“Despite the small data nature of the problem,” Balachandran added, “our approach worked because we were able to combine our understanding of these materials (domain knowledge) with the data to inform the machine learning.”
Therefore, the group began building a database of known materials and using machine learning, a subfield of computer science that builds algorithms capable of learning from data and then using that learning to make better predictions. “With machine learning, we are able to identify chemical compositions that are likely candidates for the material you want to develop,” he said.
Of the more than 3,000 possible materials investigated, the data science approach found more than 200 with promising candidates. Next, the team applied several types of rigorous quantum mechanical calculations. This assessed the atomic structures of the potential materials and checked their stability.
“We wondered: Would the material have the predicted structure? Does it have electric polarization? Can it be made in a laboratory?” Rondinelli added.
This work narrowed the possibilities to 19, which were recommended for immediate experimental synthesis. Yet there are likely many more possibilities among the 200 candidates.
Typically, when developing new materials, the number of possibilities is too large to explore and develop each one. The process of screening potential materials is very expensive, and scientists must be selective in their investments.
“Our work has the potential to help save enormous amounts of time and resources,” Balachandran said. “Instead of exploring all possible materials, only those materials that have the potential to be promising will be recommended for experimental investigation.”
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.