Artificial Intelligence and Robots to Make Offshore Windfarms Safer and Cheaper
March 9, 2017 | University of ManchesterEstimated reading time: 2 minutes
The University of Manchester is leading a consortium to investigate advanced technologies, including robotics and artificial intelligence, for the operation and maintenance of offshore windfarms.
The remote inspection and asset management of offshore wind farms and their connection to the shore is an industry which will be worth up to £2 billion annually by 2025 in the UK alone.
Eighty to ninety percent of the cost of offshore operation and maintenance according to the Crown Estate is generated by the need to get site access – in essence get engineers and technicians to remote sites to evaluate a problem and decide what action to undertake.
Such inspection takes place in a remote and hazardous environment and requires highly trained personnel of which there is likely to be a shortage in coming years.
The £5m project will investigate the use of advanced sensing, robotics, virtual reality models and artificial intelligence to reduce maintenance cost and effort. Predictive and diagnostic techniques will allow problems to be picked up early, when easy and inexpensive maintenance will allow problems to be readily fixed. Robots and advanced sensors will be used to minimise the need for human intervention in the hazardous offshore environment.“
The UK has world-leading expertise in the technologies and science in this area, but they have often operated separately. The UK Engineering and Physical Sciences Research Council have supported this project to bring them together for the first time to make a real step change in this industry
The use of robots will allow operation in difficult or hazardous environments: sub-sea to inspect cables, in high-voltage environments to inspect high voltage equipment and around the wind turbines to check their mechanical structures. The latest in advanced sensors will be used, for example sonar techniques to assess sub-sea cable wear and degradation in situ. This, along with state-of-the-art system modelling and artificial intelligence, will be used to best assess the data produced.
The University of Manchester’s Professor Mike Barnes, who is leading the three-year project, said: “The UK has world-leading expertise in the technologies and science in this area, but they have often operated separately. The UK Engineering and Physical Sciences Research Council have supported this project to bring them together for the first time to make a real step change in this industry.”
The project is a collaboration between the universities of Manchester, Durham, Warwick, Cranfield, Heriot-Watt and a consortium of companies from the offshore industry. Techniques will be trialled in an offshore test site in Scotland and a project demonstration will be given at Salford Quays, Manchester.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
IPC Publishes Comprehensive Strategy to Address Electronics Industry’s Global Workforce Challenge
04/10/2024 | IPCOne of the most difficult and urgent challenges facing the electronics industry is a chronic shortage of adequately skilled workers. Today, IPC unveiled an expansion of its strategy to address the workforce challenges of the U.S. electronics manufacturing industry and called on its more than 3,000 member companies to join in the effort.
UHDI Fundamentals: ASC Sponsors Ultra High Density Interconnect Symposium
03/21/2024 | Anaya Vardya, American Standard CircuitsAmerican Standard Circuits (ASC) is a major sponsor of an upcoming symposium on one of the most talked about new technologies that has come along in quite a while: ultra high density interconnect (UHDI).
onsemi Aligns Business Groups to Expand Product Portfolio and Accelerate Growth
03/13/2024 | onsemionsemi announced the formation of the Analog and Mixed-Signal Group (AMG) which will be led by newly appointed group president, Sudhir Gopalswamy.
Indium Corporation Experts to Present at SEMI THERM
03/07/2024 | Indium CorporationIndium Corporation Global Account Manager and Senior Thermal Technologist Tim Jensen and Product Development Specialist for Thermal Interface Materials Miloš Lazić will present on thermal interface material (TIM) technology at SEMI-THERM, taking place March 25–28 in San Jose, California, U.S.