Hamburg Scientists Develop Novel Nanomaterial with Controllable Optical Properties
March 13, 2017 | Helmholtz-Zentrum GeesthachtEstimated reading time: 3 minutes
Scientists at the Technical University Hamburg (TUHH) and the Helmholtz-Zentrum Geesthacht (HZG) have produced a new optical nanomaterial based on nanoporous gold, which facilitates changes of up to thirty percent in the optical transmission by applying an electrical voltage. The change is incredibly large if one considers that the thickness of the nanomaterial layer is only two hundred nanometres – which is only about five-hundredth the diameter of a human strand of hair.
Electron micrographs of the nanoporous gold network.You can see the nanoscale gold wires with the cavities. [Photo: TUHH]
Although it consists of metal, the new nanomaterial does not reflect optical radiation like a normal metal mirror. The nanoscale pore structure results in what is known as a plasmonic-optical metamaterial, which behaves like an absorbing non-metallic material in the visible part of the spectrum and only demonstrates its typical metallic character and the associated reflection properties in near infrared — that is, at longer wavelengths.
The wavelength range at which the nanomaterial absorbs and reflects can be set by manipulating the density of the pore.
Here, in a concrete case, 85% of the total volume consists of pores that are traversed by gold wires measuring only ten nanometres thick. A sponge-like material with a very large inner surface develops. A cube made of this nanoporous gold with an edge length of only four centimetres would have an inner surface measuring the size of a football field. The Hamburg scientists have now filled the material with a water-based electrolyte, which connects an externally applied electrical voltage with the thin gold ligament.
Normally, electron density as well as the optical properties of metals can barely be altered by applying a voltage.
The nanomaterial’s enormous inner surface, however, enables electron density variations in the interconnected metallic wires of up to eight percent by raising and lowering the voltage by only about one volt. This allows the optical transmission to be altered reversibly and on broad bands by up to thirty percent — an adjustable, semi-transparent mirror is created.
The newly developed nanomaterial possesses great potential for splitting water into oxygen and hydrogen by absorbing sunlight. The hydrogen generated without a manmade energy supply is an emission-free regenerative fuel, the first choice in regard to the necessary energy conversion in industrialised societies.
The Hamburg scientists want to make a substantial contribution to creating the necessary scientific technical foundation for supplying environmentally friendly energy at a time when fossil fuels are becoming scarcer, when we are facing the unresolved issue of climate change and in the midst of the current discussion on harmful particulate matter and nitric oxide emissions caused by heating and combustion engines from road traffic.
The research has been carried out within the framework of a successful cooperation for many years by the Technical University Hamburg (TUHH) and the Helmholtz-Zentrum Geesthacht (HZG). This fruitful cooperation is particularly evident in the Research Centre 986 “Tailor-Made Multi-Scale Materials Systems – M³”, jointly run by the TUHH and the HZG since 2012 and funded by the German Research Foundation (DFG) as well as the Centre for High Performance Materials (ZHM), which bundles materials science competence in the greater Hamburg area and was founded for this purpose in 2015, by TUHH and the HZG as well as by participating state governments of Hamburg and Schleswig-Holstein.
“Only the development of complementary skills at the TUHH and the HZG in the fields of photonics and nanoporous metal and the excellent cooperation between the participating scientists enabled us to cope with the range of tasks ahead – from the theoretical description to the electromagnetic simulation to the production of the nanoporous metals and their optical characterisation,” says Prof Manfred Eich. Eich is co-spokesperson of the SFB 986, director of the Institute of Optical and Electronic Materials at the TUHH and head of a working group at the HZG, which is involved in nanophotonic structures for photoelectrochemical hydrogen generation.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.